To achieve wide band-ratio Wilkinson power with simple construction

this paper introduces a new type of structure based on researching of the odd-even mode analysis

which parallels the open-circuit stub at each output port.Firstly

according to the odd-even mode analysis

the equations of the design circuit are obtained.Secondly

using Matlab solves equations to obtain the design parameters to design the Wilkinson power divider with wide-range frequency ratio (2.0~6.0) .To verify the proposed design method

a Wilkinson power divider operating at 870/2140MHz base station bands is simulated and fabricated.Measured results show that the designed dual-band power divider has a good performance at the two working bands

and the measurements have a good agreement with the simulation results.It means the design method is feasible.