over-current protection and over-voltage protection is designed
and the main loop circuit increases a zero for frequency compensatioa The circuit is designed based on CSMC 2m Bipolar process and simulated with Hspice.Simulation results shows that thermal protection could achieve protection for the circuit.When the temperature is higher than 140℃
thermal protection circuit would shut off the regulator
and when the temperature drops down to 105℃
the LDO works again.The maximum output current is 5A
and when output current exceeds the maximum output current
over-current protection circuit would shut off the regulator.When load ranges from 10mA to 5A
Changes in the output voltage does not exceed 32mV;When input voltage ranges from 3.8V to 6V
Changes in the output voltage does not exceed 3mV.