On the analysis of characteristics of the CTS and fishbone
and based on the situation that traditional fishbone prone to destroy the logical structure of original design
thus reserve the structure of 2 levers ICGs at least
bulid fishbone at specific points in clock network.According to the design requirements
there are two different new means of fishbone clock network combination with CTS.Under the same conditions
the clock delay in fishbone built on clock network points is less 47% than CTS
power consumption also reduce by 16%
and function verification is more stable than traditional fishbone.
关键词
Keywords
references
Lin Hongting, Chuang Yilin, Pulsed-latch utilization for clock-tree power optimization[J]. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2014, 22(4): 721-733. DOI: 721
Wang J, Wang X. An energy-efficient, distributed wireless multicast protocol based on concurrent CTS and N, 2connectivity[J]. Wireless Networks, 2010, 16(7): 2031-2048. DOI: 2031
Ha S, Matej S, Ispiryan M, et al. GPU-acclerated forward and back-projections with spatially varying kernels for 3D direct tof pet reconstruction[J]. IEEE Transactions on Nuclear Science, 2013, 60(1): 166-173. DOI: 166
Li H, Bhunia S, Chen Y, et al. DCG: deterministic clock-gating for low-power microporcessor design[J]. IEEE Transactions on Very Large Scale Integration Systems, 2004, 12(3): 245-254. DOI: 245