Based on the ZigBee technology in the Internet of things
the model of the platform is remote control
remote control system mainly includes automatic control module
data communication module and network interface design model
this paper focuses on the remote control system of CAN communication module. ADUM1201 and PCA82C250 receive remote control commands
through the ZigBee wireless network to the remote control system of the various underlying information data acquisition and analysis
the main control system through the ARM data transmission through the gateway to the external network. The MAC layer of ZigBee is embedded in the fuzzy neural network control program. The remote control program is loaded on the PLC logic programming. The serial port is connected with WIFI (or 4G). The PLC registers are controlled by PLL_LOCKCNT. The IO registers are controlled by A/D. The simulation results show that the system is used to model the remote control of the platform and control the signal A/D sampling data is continuous
the communication is stable and the control performance is reliable.