A design of high voltage(HV)analog multiplexer(MUX)circuit has been presented.MUX circuit has voltage inputs of eight series connected battery cells
which is suitable for battery monitoring chip voltage detecting front-end.The main part of HV MUX is several parallel connected HV switches.A HV switch is composed of complementary DMOS devices and gate drive circuit
and has eliminated the error in the signal path caused by quiescent current.The MUX circuit drives a wide common mode range differential voltage detecting circuit.Elimination of level shifter circuit causes reduction in power consumption
and greatly improves the detecting accuracy.HV MUX has been designed under 0.5m 60 V BCD process.The simulation results show that the operating current of MUX circuit is 30μA
and the error introduced by the HV MUX circuit without calibration is less than 0.2mV.
关键词
Keywords
references
Xing Y, Ma E W M, Tsui K L, et al. Battery Management Systems in Electric and Hybrid Vehicles[J]. Energies, 2011, 4(11): 1840-1857. DOI: 1840
De la Rosa, JoséM, et al. A CMOS 110-dB@40-kS/s programmable-gain chopper-stabilized third-order 2-1cascade sigma-delta Modulator for low-power high-linearity automotive sensor ASICs[J]. Solid-State Circuits, IEEE Journal of, 2005, 40(11): 2246-2264. DOI: 2246
Chen C L, Hu Y, Luo W, et al. A high voltage analog multiplexer with digital calibration for battery management systems[C]//IC Design % amp; amp; Technology(ICICDT), 2012IEEE International Conference on. Washington, DC, USA: IEEE, 2012: 1-4.
Xu L, Gonen B, Fan Q, et al. 5.2 A 110dB SNR ADC with±30Vinput common-mode range and 8μV Offset for current sensing applications[C]//SolidState Circuits Conference-(ISSCC), 2015IEEE International. Msnsfield, Texas, USA: IEEE, 2015: 1-3.
Park I Y, Choi Y K, Ko K Y, et al. BD180-a new 0.18μm BCD(Bipolar-CMOS-DMOS)Technology from7Vto 60V[C]//Power Semiconductor Devices and IC's, 2008. ISPSD'08.20th International Symposium on. [s. l. ]: IEEE, 2008: 64-67.