This paper demonstrates a novel highly integrated transmitter front-end based on microwave board. By using the field-circuit co-simulation analysis
the local oscillator link is analyzed
which makes the local oscillator have enough output power and good harmonic suppression. Full wave simulation tool (HFSS) is used to study the loss of signal path
the coupling between electromagnetic radiation and device. The Simulation results show
the third substrate integrated waveguide (SIW) BPF insertion loss is less than 3 dB
return loss greater than 15 dB. In addition
The EM coupling between the voltage controlled oscillator (VCO) output and the mixer RF port of the highest coupling is -56 dB
indicating very good isolation. Finally
we study the EMC design RF circuit board.
关键词
Keywords
references
Johnson H W, Graham M. High-speed digital design: a handbook of black magic[J]. Workshop Emv'01 Augsburg, 1993, 12(5): 42 - 50. DOI: 42
Sitaraman S, Suzuki Y, White C, et al. Modeling, design and demonstration of multi-die embedded WLANRF front-end module with ultra-miniaturized and high-performance passives, [C]//2014 IEEE 64th Electronic Components and Technology Conference (ECTC). Orlando, FL: IEEE, 2014: 1264-1271.