A multiple output isolated DC-DC converter with coreless PCB transformer was proposed and demonstrated. The four consistent output voltages were achieved with two series coreless stacked PCB transformer. The cross coupled tank and coreless PCB transformer formed sustaining oscillation. The Schottky diodes were used as rectification devices. The design of the coreless PCB transformer and the overall circuit were implemented by simulation. Experimental results showed that the four output voltages were 14 V. The delivered power was 1.5 W at 45% efficiency.
关键词
Keywords
references
Nagesha C, Sreedevi A, Gopal M. Simulation and hardware implementation of 24 Watt multiple output flyback converter[C]//Power and Advanced Control Engineering (ICPACE), 2015 International Conference on. Bangalore, 2015: 366-70.
Bouabana A, Sourkounis C, Mallach M. Design and analysis of different structure of a coreless planar transformer for a flyback converter[C]//Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2012 International Symposium on. Sorrento, 2012: 827-831.
Tang S C, Hui S Y R, Chung H. Coreless PCB transformers with multiple secondary windings for complementary gate drive circuits[C]//Power Electronics Specialists Conference (PESC), 1998 International Conference on. Fukuoka, 1998: 1965-1971.
Kotte H B, Ambatipudi A, Bertilsson K. High-speed (MHz) series resonant converter (SRC) using multilayered coreless printed circuit board (PCB) step-down power transformer[J]. IEEE, Electronics, 2013, 28(3): 1253-1264. DOI: 1253