WU Jie, LIN Dong, GAO Ke. Research and Implementation of a Digital Controlled Bi-Directional DC/DC Converter for Power Bank[J]. 2018, 35(1): 72-78.DOI:
Research and Implementation of a Digital Controlled Bi-Directional DC/DC Converter for Power Bank
A digital controlled bi-directional DC/DC converter adopting the Buck-Boost topology for power bank application is studied. The circuit principles and control method of converters different operation modes are analyzed. The paper also analyzes the key parameters which effect the performance of digital controlled system and studys the method of implementation of digital controller. Finally
a 45W experimental prototype is built with dsPIC33 microcontroller to validate the design. The experimental results show that the design realizes energy conversion in bi-directional freely and has a good effect of constant voltage-constant voltage charging process.
关键词
Keywords
references
Kondrath N, Kazimierczuk M K. Control-to-output transfer function of peak current mode controlled PWN DC-DC boost converter in CCM[J]. Electronics letters, 2011, 47(17): 991-993. DOI: 991
Sable D M, Ridley R B. Comparison of performance of single-loop and current-injection control for PWM converters that operate in both continuous and discontinuous modes of operation[J]. IEEE Transactions on Power Electronics, 1992, 7(1): 136-142. DOI: 136
Prodic A, Maksimovic D, Erickson R W. Design and implementation of a digital PWM controller for a high-frequency switching DC-DC power converter[C]// Industrial Electronics Society, 2001. IEEE, 2001, 2: 893-898.
Kazimierczuk M K, Sathappan N, Czarkowski D. Voltage-mode-controlled PWM buck DC-DC converter with a proportional controller[C]//Aerospace and Electronics Conference, 1993. IEEE, 1993: 413-419.
Cave-Ayland K, Becerra V M, Potter B, et al. Choosing the most suitable analogue redesign method for forward-type digital power converters[C]//Power Electronics, Drives and Energy Systems (PEDES), 2012 IEEE International Conference on. IEEE, 2012: 1-6.