WANG Dan, GUO Gui-liang, JIANG Yu, et al. Analysis and Design of a Rail-to-Rail Operational Amplifier Based on Chopper Technology[J]. 2017, 34(10): 97-100.
WANG Dan, GUO Gui-liang, JIANG Yu, et al. Analysis and Design of a Rail-to-Rail Operational Amplifier Based on Chopper Technology[J]. 2017, 34(10): 97-100.DOI:
Analysis and Design of a Rail-to-Rail Operational Amplifier Based on Chopper Technology
A rail-to-rail operational amplifier with low-voltage low-offset and constant transconductance is designed in TSMC 0.18 m CMOS process.The operational amplifier has a rail-to-rail folded cascode input stages
which ensures a constant transconductance over the available common-mode input range and all input transistors operate in sub-threshold region.A class-AB output stage with folded mesh feedback is used to achieve the rail-to-rail output range.The chopper stabilization technique is exploited to reduce the input referred offset and noise.The circuit is simulated in Cadence Spectre with a single 1 V supply.The simulation results show that the dc gain is 119dB and the GBW is 5.6 MHz.Montecarlo simulations demonstrate an offset distribution with 14 V standard deviation.The input noise spectral density is 18.19 nV/√Hz
关键词
Keywords
references
Ge Fuding, Farahani Bahar Jalali. A versatile chopper-stabilized rail-to-rail operational amplifier[C]//Symposium on Circuits % Systems. IEEE, 2008: 113-116.
Pipino A, Pezzotta A, Resta F, et al. A rail-to-rail-input chopper instrumentation amplifier in 28nm CMOS[C]//IEEE International Conference on Electronics. IEEE, 2016: 73-76.
彭新朝. 高增益恒跨导低失调轨至轨运算放大器的设计[D]. 广州: 华南理工大学, 2012.
Bakker A, Thiele K, Huijsing J H. A CMOS nested-chopper instrumentation amplifier with 100-nV offset[J]. IEEE Journal of Solid-State Circuits, 2000, 35(12): 1877-1883. DOI: 1877
张雷. 一种低压高精度CMOS运算放大器设计[D]. 镇江: 江苏大学, 2010.
Langen K J de, HuijsingJ H. Compact low-voltage power-efficient operational amplifier cells for VLSI[J]. IEEE Journal of Solid-State Circuits, 1998, 33(10): 1482- 1496. DOI: 1482
Enz C C, Temes G C. Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated Double sampling, and chopper stabilization[J]. Proceedings of the IEEE, 1996, 84(11): 1584-1614. DOI: 1584