In view of the limited effect of current methods to reduce the crosstalk of microstrip lines on PCB board
a method to reduce the crosstalk of microstrip lines using interdigital capacitance is proposed. In this method
an interdigital capacitor is added symmetrically to the two ends of the microstrip line to compensate the capacitance to balance the unequal coupling capacitance and inductance
thereby reducing the crosstalk. The simulation and actual measurement of remote crosstalk and insertion loss are carried out by using electromagnetic simulation software (HFSS) and vector network analyzer. The results show that the simulation and measurement are in good agreement. The addition of interdigital capacitor can reduce the remote crosstalk by more than 9 dB
and the production cost is low and easy to realize.
关键词
Keywords
references
SABA F, VIBHA R G. Far end crosstalk reduction in two near by transmission lines[C]//2012 1st International Conference on Recent Advances in Information Technology (RAIT). Dhanbad, India: IEEE, 2012: 224-227.
LOUBNA T, NABIH E O. Minimizing crosstalk on printed circuit board using non uniform guard traces[C]//Proceedings of 2016International Conference on Information Technology for Organizations Development. Fez, Morocco: IEEE, 2016: 1-4.
LEE K, LEE H B, JUNG H K, et al. A serpentine guard trace to reduce the far-end crosstalk voltage and the crosstalk induced timing jitter of parallel micro-strip lines[J]. IEEE Transactions on Advanced Packaging, 2008, 31(4):809-817. DOI: 809
PONCHAK G E, CHUN DONGHOON. Experimental verification of the use of metal filled via hole fences for crosstalk control of microstrip lines in LTCC packages [J]. IEEE Transactions on Advanced Packaging, 2001, 24(1):76-80. DOI: 76
于峥.信号完整性揭秘[M].北京:机械工业出版社, 2013:142-149. DOI: 142
FELIX D, MBAIRI W, PETER S, et al. High frequency transmission lines crosstalk reduction using spacing rules[J].IEEE Transactions on Components and Packaging Technologies, 2008, 31(3):601-610. DOI: 601
DELORME N, BELLEVILLE M, CHILO J. Inductanceand capacitance analytic formulas for VLSI Interconnects [J].Electronics Letters, 1996, 32(11):996-997. DOI: 996
JOHNSON H, GRAHAM M.高速数字设计[M].沈立, 朱来文, 陈宏伟, 等, 译.北京: 电子工业出版社, 2010: 322-323.
KAMI Y, SATO R. Analysis of radiation characteristics of a finite-length transmission line using a circuit-concept approach [J]. IEEE transactions on Electromagnetic Compatibility, 1988, 30(2):114-121. DOI: 114
YOUNG B. Digital signal integrity: modeling and simulation with interconnects and packages[M].Prentice Hall PTR.2001:55-103.
KAMI Y, SATO R. Crosstalk of finite length transmission lines in arbitrary directions on the same ground [C]// International Symposium on Electromagnetic Compatibility, 1992: 247-250.
PAMUNUWA D, ZHENG L R, TENHUNEN H. Maximiz-ing throughput over parallel wire structures in the deep submicrometer regime [J]. IEEE Transactions on Very Large Scale Integration System, 2003, 11(2):224-243. DOI: 224
GAZIZOV T R. Far-end crosstalk reduction in double-layered dielectric interconnects[J].IEEE transactions on Electromagnetic Compatibility, 2001, 43(4):566-572. DOI: 566
MALLAHZADEH A R, GHASEMI A H, AKHLAGHI S, et al. Crosstalk reduction using step shapedtransmission line[J].Progress In Electromagnetics Research, 2010(12):139-148. DOI: 139
SHIUE G H, ZHANG Z H, YEH C L, et al. Analysis and reduction of coupling noise in coupled striplines with inserted guard trace with different trace spacings[J].IEEE Transactions on Components, Packaging and Manufacturing Technology, 2013, 8(3): 1372-1383. DOI: 1372