A low-noise instrumentation amplifier isproposed for biopotential signals acquisition. This circuit use a three-stage current feedback topology with miller compensation to achieve a high common-mode rejection ratio. A two-stage chopping structure is used to significantly reduce 1/f noise and DC offset. The output ripple introduced by the chopper switch is eliminated by implanting a second-order Sallen-Key low-pass filter. The circuit is designed in a SMIC 0.13 μm CMOS process with a current dissipation of 48μA at 1.2 V supply voltage
and the input reference noise power spectral density (PSD) is 26nV/rtHz
the noise efficiency factor (NEF) is 6.4 and the common mode rejection ratio is 114 dB. The simulation results show that at the first harmonic
the circuit reduce the high-frequency output ripple by a factor of 1/43.
关键词
Keywords
references
DOOL B J V D, HUIJSING J K. Indirect current feedback instrumentation amplifier with a common-mode input range that includes the negative roll[J]. IEEE Journal of Solid-State Circuits, 2002, 28(7):743-749. DOI: 743
LEE H S, NGUYEN V N, PHAM X L, et al. A 250-μW, 18-nV/rtHz current-feedback chopper instrumentation amplifier in 180-nm cmos for high-performance bio-potential sensing applications[J]. Analog Integrated Circuits and Signal Processing, 2017, 90(1):137-148. DOI: 137
ZHENG J, KI W H, HU L, et al. Chopper Capacitively-Coupled Instrumentation Amplifier Capable of Handling Large Electrode Offset for Biopotential Recordings[J]. IEEE Transactions on Circuits and Systems II: Express Briefs, 2017, 64(12):1392-1396. DOI: 1392
KELLY S D T, SURYADEVARA N K, MUKHOPADHYAY S C. Towards the Implementation of IoT for Environmental Condition Monitoring in Homes[J]. IEEE Sensors Journal, 2013, 13(10):3846-3853. DOI: 3846
WU R, MAKINWA K A A, HUIJSING J H. A Chopper Current-Feedback Instrumentation Amplifier With a 1 mHz1/f Noise Corner and an AC-Coupled Ripple Reduction Loop[J]. IEEE Journal of Solid-State Circuits, 2009, 44(12):3232-3243. DOI: 3232
LEE H S, NGUYEN V N, PHAM X L, et al. A 250-μW, 18-nV/rtHz current-feedback chopper instrumentation amplifier in 180-nm cmos for high-performance bio-potential sensing applications[J]. Analog Integrated Circuits and Signal Processing, 2017, 90(1):137-148. DOI: 137
ZOU X, XU X, YAO L, et al. A 1-V 450-nW fully integrated programmable biomedical sensor interface chip[J]. IEEE Journal of Solid-State Circuits, 2009, 44(4):1067-1077. DOI: 1067
ZHANG Y, SUN L, SONG H, et al. Ubiquitous WSN for Healthcare: Recent Advances and Future Prospects[J]. IEEE Internet of Things Journal, 2014, 1(4):311-318. DOI: 311
SAAD M, El-NOZAHI M, RAGAI H. Low noise chopper instrumentation amplifier with feed-forward ripple suppression technique[C]// 2016 28th International Conference on Microelectronics (ICM).Giza, EgyptIEEE Press, 2016, 305-308.
AHMED M, MOHAMAD S, BERMAK A. A power-efficient current-feedback instrumentation amplifier for precision bridge readout[C]// IEEE International Conference on Electron Devices % Solid-state Circuits.SingaporeSingaporeIEEE Press, 2015, 555-558.