基于0.35 μm工艺,设计了一种工作在15~30 V的宽电源电压的高电源抑制比(PSRR)、快速瞬态响应的线性LDO.该LDO主要包含电源电压预调节模块、基准源模块、误差放大器模块.电源电压预调节模块,降低输入电压波动范围,同时采用了PSRR增强电路,提高LDO的线性稳定性和PSRR;误差放大器模块,采用了一种带正反馈增益增强差分放大器电路,提高了电路的增益,同时采用双环反馈技术,提高LDO的瞬态响应速度.仿真结果表明:输出电压为5 V,PSRR低频时为128 dB,100 kHz时为60 dB,瞬态响应时间约为0.1 s.
Abstract
Based on the 0.35 μm process
a high power supply rejection ratio (PSRR) and fast transient response linear LDO was designed.The LDO consists of a power supply voltage pre-regulation module
a reference source module and an error amplifier module.The power supply voltage pre-regulation module reduces the input voltage fluctuation range. Meanwhile
PSRR enhancement circuit is adopted to improve the linear stability of LDO and PSRR.The error amplifier module adopts a differential amplifier circuit with positive feedback gain to improve the gain of the circuit
and at the same time adopts double-loop feedback technology to improve the transient response speed of LDO.Simulation results show that the output voltage is 5 V
the PSRR low frequency is 128 dB
100 kHz is 60 dB
and the transient response time is about 0.1 s.
关键词
Keywords
references
LEI Q Q, YU N M, YANG Y.Low-dropout regulator design using Reverse Nested Miller compensation [C]//2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).Taipei, Taiwan: IEEE, 2015: 1-4.
PHUOC T TRAN, HERBERT L HESS, KENNETH V NOREN.Operational amplifier design with gain-enhancement differential amplifier[C]//IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.Montreal, QC, Canada: IEEE, 2012: 6248-6253.
BHUPENDRA K, AHUJA.An improved frequency compensationtechnique for CMOS operational[J].Solid-State Circuits, 1983, 18(6):629-633. DOI: 629
ROSARIO MITA, GAETANO PALUMBO, SALVATORE PENNISI.Design guidelines for reversed nested miller compensationin three-stage amplifiers[J].Analog and Digital Signal Processing, 2003, 50(5):227-233. DOI: 227
MITA R, PALTIMBO G, PENNISI S.Reversed nested miller compensation with current follower[C]//ISCAS 2001.The 2001 IEEE International Symposium on Circuits and Systems (Cat. No.01CH37196).Sydney, NSW, Australia: IEEE, 2001: 6-9.