Aiming at the widely used Buck DC-DC power management system
a negative feedback loop for Buck DC-DC power management chip reference circuit is designed in this paper
considering the influence of the voltage accuracy generated by the bandgap reference source on the system output.Based on the analysis of the traditional BJT-based voltage reference source
this paper selects Huahong 0.18μm BCD process and performs simulation in the temperature range of -40℃ to 100℃. When the input voltage is 5 V
the temperature coefficient of the reference source is4.9×10ppm/℃
and power supply rejection ratio(PSRR) is -65.8 dB@dc
-40.2 dB@1.5 MHz
all of which show good performance.
关键词
Keywords
references
ZHOU Z X, LAI Q T, JIANG Y, et al.A high PSRR bandga preference[J].Microelectronics % Computer, 2019, 36(5):1-9. DOI: 1
BEHAZD RAZZVI.Design of analog CMOS integrated circuits[M].CHEN G C. Xi'an: Xi'an Jiaotong University Press, 2002: 309-315.
Nan Jing WU J, YAO J N, CHANG C Y.CMOS analog IP linear integrated circuit[M].Nan Jing: Southeast University Press, 2007:107-112. DOI: 107
HE Z W, JIANG Y F.Design of CMOS bandgap voltage reference circuit with high PSR[J].Modern Electronics Technique, 2014, 37(13):153-158. DOI: 153
WANG Y X, ZHU B.A CMOS bandgap reference for PWM control buck DC-DC converters[J].Chinese Journal of Electron Devices, 2013, 36(2):252-255. DOI: 252
XIE F, DAI Q Y.Design of a new CMOS integrated drop-out voltage-regulator IP block[J].Chinese Journal of Electron Devices, 2009, 6(9):1027-1030. DOI: 1027
ZHANG X Z, ZHANG T.A bandgap voltage reference with third‐order curvature compensation[J].Journal of Wuhan University of Science and Technology, 2015, 38(1):67-71. DOI: 67