Due to the particularity of the asymmetric network structure
there are difficulties in using the protocol for clock synchronization. This article analyzes the reason why the protocol is difficult to be compatible with asymmetric network. It focuses on the defects of using 1588v2 in the asymmetric ring network and gives simulations of original algorithm based on the protocol.Thus
a set of P2P transparent clock-based clock synchronization algorithms for asymmetric ring network is designed on the basis of avoiding the use of delayAsymmetry correction values. Experimental results show that the algorithm improves the synchronization accuracy and makes the 1588v2 protocol better applicable to ring networks.
关键词
Keywords
references
ZHANG H W. Feature comparison among commonly used topological strutures in Industrial ethernet[J].Inner Mongolia Electric Power, 2006(24):93-96. DOI: 93
AQSIQ, SAC. GB/T25931-2010. Precision clock synchronization protocol for networked measurement and control systems[S]. Beijing: Standards Press of China, 2011.
LI S X. Research and implementation of 2-layer ethernet swith bashed on IEEE 1588v2[D]. WEI H: Shandong University, 2014.
LIU S P. Research on the application of IEEE 1588 in high-availability seamless redundancy[D]. Tianjin: Tianjin University, 2013.
IEEE 1588-2002.IEEE Standard for a precision clock synchronization protocol for networked measurement and control systems[S], 2002.
CHEN S, ZHAO S. Analysis on IEEE1588v2 time synchronization principles and application [J]. High Speed Railway Technology, 2015, 6(3):80-85. DOI: 80
CUI Q S, BAI X M, HUANG B Y, et al. Test method for the resident time error of P2P transparent clock and its implementation on the clock tester[J]. Power System technology, 2017, 41(1):322-327. DOI: 322
GUO M F, LIN S M, LIN B, et al. MINS/GPS tightly-coupled integerated navigation system[J]. Journal of Chinese Inertial Technology, 2011, 19(2):214-219. DOI: 214