The Adiabatic Film Effectiveness of the Double Wall with Inclined Multihole and Discrete-hole for Combustor Liner
|更新时间:2026-07-07
|
The Adiabatic Film Effectiveness of the Double Wall with Inclined Multihole and Discrete-hole for Combustor Liner
Vol. 15, Issue 4, (2000)
作者机构:
北京航空航天大学热动力工程研究所,北京,100083
作者简介:
基金信息:
DOI:
CLC:
Published:2000
稿件说明:
移动端阅览
XU Quan-hong, ZHANG Bao-hua, LIN Yu-zhen, et al. The Adiabatic Film Effectiveness of the Double Wall with Inclined Multihole and Discrete-hole for Combustor Liner[J]. 2000, 15(4).
DOI:
XU Quan-hong, ZHANG Bao-hua, LIN Yu-zhen, et al. The Adiabatic Film Effectiveness of the Double Wall with Inclined Multihole and Discrete-hole for Combustor Liner[J]. 2000, 15(4).DOI:
The Adiabatic Film Effectiveness of the Double Wall with Inclined Multihole and Discrete-hole for Combustor Liner
The adiabatic wall film cooling effectiveness of double wall with impingement of cooling air through discrete-hole wall to the inclined multihole wall were investigated experimentally
on the basis of the heat-mass transfer analogy.The mass transfer measurements were conducted for film cooling mass flow ratios ranging from 0.5 to 2.0
different hole pitch-to-diameter ratios
and the spacing of double wall.Finally
the formulas for five different structures of double wall were fitted by the least square method according to the distribution of average lateral adiabatic wall film cooling effectiveness.The results of the investigation show that the adiabatic wall film cooling effectiveness is affected very little by the distance between the double wall for the same blowing ratio and the same geometry of the inclined multihole wall.But its distribution is determined mainly by the blowing ratio and the hole arrangement of the inclined multihole wall.The long rhombus hole arrangement of the inclined multihole wall is a better way in view of the adiabatic wall film cooling effectiveness.