Pressure transducers for pressure measurement of rotating disk surface have to rotate with the disk and this may give rise to the difficulty that measuring error may be unavoidable due to the membrane deformation caused by the centrifugal force.A real time local calibration
thus
has to be introduced for an accurate pressure measurement.A device was installed onto the test rig to generate a standard pressure source under rotating frame and this standard pressure was used for real time calibration.
Effects on calibration and use of thermochromic liquid crystal
Grey Correlation of Vibrationwith Rolling Bearing’s Machining Quality
Experimental Investigation of Flow and Heat Transfer About the Thermal Driving of12 in Rotating Small-Size Circular Enclosures
与发动机匹配的旁路式双喉道气动矢量喷管数值模拟研究
Related Author
张岩松
邱大明
王洪斌
YANG Lei
SU Jun
WANG Hong-bin
ZHAO Xi
XU Guo-qiang
Related Institution
中国航空发动机集团有限公司 沈阳发动机研究所
Shenyang Engine Design and Research Institute, Aviation Industry Corporation of China
National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Energy and Power Engineerig, Beijing University of Aeronautics and Astronautics
Luoyang Bearing Group Ltd.
College of Instrument Science and Photoelectricity Engineering,Beijing University of Aeronautics and Astronautics