An Investigation of J Integral Evaluation Method for Cylindrical Bars with Circumferential Crack

YU Hui-chen; XIE Shi-shu; HE Feng-wei; ZHANG Yan-ji

Chinese

您当前的位置：

首页 >

文章列表页 >

An Investigation of J Integral Evaluation Method for Cylindrical Bars with Circumferential Crack

更新时间：2026-07-07

- An Investigation of J Integral Evaluation Method for Cylindrical Bars with Circumferential Crack
- Vol. 19, Issue 6, (2004)
- 作者机构：
  
  1. 北京航空材料研究院,北京,100095
  2. 宝山钢铁集团公司技术中心,上海,201900
  3. 本溪大学,辽宁,本溪,117100
  4. 本溪钢铁集团有限责任公司,辽宁,本溪,117100
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2004
- 稿件说明：
移动端阅览
YU Hui-chen, XIE Shi-shu, HE Feng-wei, et al. An Investigation of J Integral Evaluation Method for Cylindrical Bars with Circumferential Crack[J]. 2004, 19(6).
DOI：

YU Hui-chen, XIE Shi-shu, HE Feng-wei, et al. An Investigation of J Integral Evaluation Method for Cylindrical Bars with Circumferential Crack[J]. 2004, 19(6). DOI：

摘要

通过有限元解析方法分别研究了轴向或扭转载荷下带环状裂纹圆棒试样的J积分的评价方法。首先模拟计算得到了一系列带有不同深度环状裂纹的中碳钢圆棒试样的载荷-位移关系

然后分别利用单试样的简单评价法和多试样的能量评价法计算J积分值。结果发现

当圆棒试样的裂纹深度足够深或位移足够小时

两种评价方法计算的J积分值相当一致。

Abstract

Finite element method was used to analyze the J integral evaluation method for a cylindrical specimen with deep circumferential crack under axial or torsional load.First

the relationship between axial or torsional load and axial or angular displacement of cylindrical specimens with different circumferential crack depth was determined.Then

two methods were used to calculate the J integral.One is the simple method that calculates the J integral by a single specimen's load-displacement relationship;the other is the energy method.The J integral obtained by the simple method agrees well with that determined by the energy method using multiple medium carbon steel specimens with a circumferential crack

as far as the crack depth is deep enough or the axial or angular displacement is small.

关键词

Keywords

references

Views

518

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Aerodynamic characteristics of design Mach number of 5 two-dimensional inlet with mixed-compression under typical condition

Computation of effect of different nozzle parameters on internal performance of convergent-divergent axisymmetric nozzle

Study of novel flow control concept for fix-geometry two-dimensional mix-compression supersonic inlet

Nonlinear dynamic response analysis of unbalance-rubbing coupling faults of rotor-ball bearing-stator coupling system

Related Author

LU Si-da

GAO Xi-guang

SONG Ying-dong

WENG Xiao-chai

GUO Rong-wei

ZHU Dan-dan

SHAO Wan-ren

WENG Xiao-chai

Related Institution

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

Unit 94710, the Chinese People's Liberation Army

Innovation Center for Advanced Aero-Engine

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰