Convective heat transfer of jet impingement inside semi-confined channel

ZHANG Ze-yuan; ZHANG Jing-zhou; YANG Wei-hua

Chinese

您当前的位置：

首页 >

文章列表页 >

Convective heat transfer of jet impingement inside semi-confined channel

更新时间：2026-07-07

- Convective heat transfer of jet impingement inside semi-confined channel
- Vol. 21, Issue 4, (2006)
- 作者机构：
  
  南京航空航天大学能源与动力学院学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2006
- 稿件说明：
移动端阅览
ZHANG Ze-yuan, ZHANG Jing-zhou, YANG Wei-hua. Convective heat transfer of jet impingement inside semi-confined channel[J]. 2006, 21(4).
DOI：

ZHANG Ze-yuan, ZHANG Jing-zhou, YANG Wei-hua. Convective heat transfer of jet impingement inside semi-confined channel[J]. 2006, 21(4). DOI：

摘要

运用红外热像仪测试技术对半封闭通道单、双排孔射流冲击冷却进行了热像显示试验

总结了各种流动参数和几何参数对局部换热特性的影响规律:对于单排垂直射流

冲击冷却效果随冲击雷诺数的增加、孔间距与直径比的减小而得到提高

冲击间距比为2时换热效果最好;冲击孔中心线向通道封闭一侧倾斜后

射流冲击冷却的范围变窄

当冲击间距比大于2时驻点区的对流换热能力明显降低;对于双排冲击射流

在较小的冲击射流雷诺数和较大的冲击间距比下

后排射流的冲击换热效果要逊于前排射流。

Abstract

The thermal image visualization of jet impingement cooling with single or double rows of holes inside the semi-enclosed channel were revealed by using infrared camera and then the impingement cooling heat transfer coefficients were deduced.The effects of flow and geometric parameters on convective heat transfer coefficients were obtained.The results show that: for a single row normal impingement

the impingement cooling effectiveness is enhanced with the increase of impinging Reynolds number or the decrease of hole spacing to diameter ratio

and the best effectiveness is achieved under the jet-to-surface spacing equals to 2;when the jet is oblique to the confined wall

the cooling effectiveness is weakened especially when the jet-to-surface spacing ratio is greater than 2;for double rows of holes with normal impingement cooling

the cooling effectiveness of rear row jets is weaker than the front row jets at lower impinging Reynolds number or larger jet-to-surface spacing.

关键词

Keywords

references

Views

475

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of Flow and Heat Transfer in Rectangular Channel with Staggered Arrays of Droplet-Type Pin Fins

Wall temperature calculation on an axi-symmtrical converging-diverging nozzle considering heat conduction,convection and radiation

An integrated optimization of hypersonic forebody/inlet based on surrogate models

Numerical analysis of 3D temperature field of an impingement-effusion cooled flame tube floating tile

A numerical study on the effects of bamboo-shaped pin fin arrays on flow and heat transfer

Related Author

YANG Cheng-feng

ZHANG Jing-zhou

TAN Xiao-ming

LIU You-hong

LI Jiang-ning

CAI Juan

WU Xian-yu

LIU Rui

Related Institution

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics

Shenyang Aeroengine Design and Research Institute

Institute of Aerospace and Material Engineering, National University of Defense Technology

College of Energy and Power Engineering, Nanjing U niversity of Aeronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰