Experimental and numerical study of jet mixing enhancement with wedged nozzle

LIU Xin; JIANG Nan

Chinese

您当前的位置：

首页 >

文章列表页 >

Experimental and numerical study of jet mixing enhancement with wedged nozzle

更新时间：2026-07-07

- Experimental and numerical study of jet mixing enhancement with wedged nozzle
- Vol. 21, Issue 5, (2006)
- 作者机构：
  
  天津大学力学系,天津,300072
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2006
- 稿件说明：
移动端阅览
LIU Xin, JIANG Nan. Experimental and numerical study of jet mixing enhancement with wedged nozzle[J]. 2006, 21(5).
DOI：

LIU Xin, JIANG Nan. Experimental and numerical study of jet mixing enhancement with wedged nozzle[J]. 2006, 21(5). DOI：

摘要

实验测量了圆湍射流和不同数目加齿射流流场速度信号

用标准k-ε模式对实验中对应条件的湍射流流场进行了数值计算。研究了喷口不同数目加齿对自由湍射流多尺度湍涡结构的控制效果。结果表明:加齿改变了湍射流多尺度涡结构能量的空间分布

将射流中心线位置的能量向边界输运。此外

加齿对近场齿尖位置涡结构具有破碎作用

而且在不同流向法向位置还会引起涡的合并和卷吸。

Abstract

Experimental flow field measurement of the circular and various wedged turbulent jets has been carried out.Simultaneously

standard k-ε model has been employed in the numerical simulation of the mean flow fields of various turbulent jets corresponding to the measured values.Comparison research has been performed to analyze the fragmentation and enhanced mixing effect of the nozzles with different number of wedge on the multi-scaled turbulent eddy structures in the free jet flow.The experimental and numerical results show that the energy distribution of wedged jets in space is different from that of the circular jet with the energy at the center being transported sidewise.Furthermore

due to the wedges not only the eddy structures at the wedge tines in the near field are broken up

but also the interactions such as eddy structures rejoining and entrainment take place at different locations normal to the flow along the longitudinal development of the jets.

关键词

Keywords

references

Views

455

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Control method of thermoacoustic instability with sound lining with heating bias flow

Penetration characteristics and optimization of transverse jet on condition of vortex generator

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Aerodynamic characteristics of design Mach number of 5 two-dimensional inlet with mixed-compression under typical condition

Computation of effect of different nozzle parameters on internal performance of convergent-divergent axisymmetric nozzle

Related Author

莫长彩

徐亮亮

王思睿

王国情

李磊

ZHAO Yan-hui

LIANG Jian-han

YAN Tian-tian

Related Institution

上海交通大学机械与动力工程学院

Science and Technology of Scramjet Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰