Numerical Investigation of Jet Impingement Cooling with Non-Uniform Crossflow

TAN Lei; ZHANG Jing-zhou; TAN Xiao-ming

Chinese

您当前的位置：

首页 >

文章列表页 >

Numerical Investigation of Jet Impingement Cooling with Non-Uniform Crossflow

更新时间：2026-07-07

- Numerical Investigation of Jet Impingement Cooling with Non-Uniform Crossflow
- Vol. 21, Issue 3, (2006)
- 作者机构：
  
  南京航空航天大学能源与动力学院,江苏,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2006
- 稿件说明：
移动端阅览
TAN Lei, ZHANG Jing-zhou, TAN Xiao-ming. Numerical Investigation of Jet Impingement Cooling with Non-Uniform Crossflow[J]. 2006, 21(3).
DOI：

TAN Lei, ZHANG Jing-zhou, TAN Xiao-ming. Numerical Investigation of Jet Impingement Cooling with Non-Uniform Crossflow[J]. 2006, 21(3). DOI：

摘要

运用数值计算的方法对非均匀横流作用下冲击射流冷却的流动和传热过程进行了三维数值研究

揭示出射流冲击孔和横流孔相对排列方式、射流雷诺数和横流雷诺数相对大小、射流孔中心至横流孔出口截面距离等因素对冲击射流冷却流动传热特性的影响。结果表明:若保持总的冷却流量不变

当横流雷诺数与射流雷诺数之比等于或大于0.5后

有横流时的冲击射流冷却局部努塞尔数比无横流时有较为显著的下降;在非均匀的横流作用下

对于叉排和顺排方式

由于射流和横流的相互作用

壁面温度分布呈现出复杂的特征;射流孔和横流孔呈顺排布置时

峰值努塞尔数所对应的射流驻点区向下游偏移。

Abstract

Three-dimensional numerical computation of the flow and heat transfer for the jet impingement cooling with non-uniform initial crossflow was conducted to investigate the effects of the jet-to-surface spacing

the impinging holes and crossflow holes arrangement

as well as the crossflow to jet Reynolds number ratio on the heat transfer characteristics.When the crossflow to jet Reynolds number ratios are equal or greater than 0.5

the jet impingement Nusselt numbers are obviously lower than that without crossflow under the same total cooling massflow rate.Under the action of non-uniform crossflow

the temperature distributions take complicated feature for both staggered and inline arrangements owing to the interaction of jet and crossflow.Compared to the case of staggered arrangement between jet holes and crossflow holes

the stations corresponding to peak Nusselt numbers for inline arrangement move downstream.

关键词

Keywords

references

Views

491

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of Flow and Heat Transfer in Rectangular Channel with Staggered Arrays of Droplet-Type Pin Fins

An integrated optimization of hypersonic forebody/inlet based on surrogate models

A numerical study on the effects of bamboo-shaped pin fin arrays on flow and heat transfer

Flow and performance calculation of absorber/thruster of solar thermal propulsion

Experimental Study on Impingement Cooling Characteristics of Synthetic Jet Flux Activated by Piezoelectricity

Related Author

YANG Cheng-feng

WU Xian-yu

LIU Rui

LUO Shi-bin

WANG Zhen-guo

HUANG Guo-lian

WANG Suo-fang

ZHANG Chun-liang

Related Institution

Institute of Aerospace and Material Engineering, National University of Defense Technology

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

School of Space Technology, Beijing University of Aeronautics and Astronautics

The First Aeronautics Institute of PLA Air Force

College of Energy and power, Nanjing University of Aeronautics and Astronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰