An efficient method for increasing mass flow capture ratio of a three-dimensional sidewall compression scramjet inlet

JIN Zhi-guang; ZHANG Kun-yuan

Chinese

您当前的位置：

首页 >

文章列表页 >

An efficient method for increasing mass flow capture ratio of a three-dimensional sidewall compression scramjet inlet

更新时间：2026-07-07

- An efficient method for increasing mass flow capture ratio of a three-dimensional sidewall compression scramjet inlet
- Vol. 21, Issue 5, (2006)
- 作者机构：
  
  南京航空航天大学能源与动力学院,江苏,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2006
- 稿件说明：
移动端阅览
JIN Zhi-guang, ZHANG Kun-yuan. An efficient method for increasing mass flow capture ratio of a three-dimensional sidewall compression scramjet inlet[J]. 2006, 21(5).
DOI：

JIN Zhi-guang, ZHANG Kun-yuan. An efficient method for increasing mass flow capture ratio of a three-dimensional sidewall compression scramjet inlet[J]. 2006, 21(5). DOI：

摘要

在一种双楔顶压、侧板中置的常规后掠侧压式进气道基础上通过减小顶板第二压缩角

引入圆弧压缩面设计了一种具有较高流量系数的进气道。利用Fluent商业计算软件对比研究了该进气道与常规进气道在Ma=6和Ma=4下的流动特征及性能。研究发现

新的改进措施能在几乎不降低进气道总压恢复系数的前提下大幅度提高流量系数:在Ma=6来流条件下

改进后的进气道流量系数为0.87

比常规进气道提高14.5%;在Ma=4来流条件下

流量系数为0.69

提高了19%。

Abstract

For a typical backward-sweep sidewall compression scramjet inlet with two ramps and mid-located sidewalls

a modified inlet with higher mass flow capture ratio was designed by reducing the second ramp angle and using circular arc compression surface.The flow filed was numerically simulated and comparisons were made between the modified inlet and the typical one at the free stream Mach number of 6 and 4.Numerical results indicate that most of the performance parameters of the modified inlet are obviously improved and the mass flow capture ratio is greatly increased by using the new method.At Mach 6 incoming condition

the mass capture ratio of the modified inlet was 0.87

which was 14.5 percent higher than that of the typical one;at Mach 4 incoming condition

the mass flow capture ratio was 0.69

19% percent higher than that of the typical one.

关键词

Keywords

references

Views

423

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of the Flowfield in a Scaled down Scramjet Combustor

Accurate prediction method of flow coefficient for 2D curved surface variable inlet

Parameters analysis of adaptive pressure relief slot in hypersonic inlet

Design of hypersonic inward turning inlets base on concept of controllable Mach number distribution

Unsteady characteristics of hypersonic inlet below self-starting Mach number

Related Author

WANG Yuan-guang

XU Xu

CAI Guo-biao

李永洲

马元

张堃元

LIU Yuan

NAN Xiang-jun

Related Institution

School of Astronautics, Beijing University of Aeronautics and Astronautics

中国航天科技集团有限公司西安航天动力研究所

南京航空航天大学能源与动力学院

Unit 92724, The Chinese People's Liberation Army

School of Aerospace, Tsinghua University

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰