Effect of different porosity on thermally driven heat transfer in a centrifugal force field

XIA Jie; CHANG Hai-ping

Chinese

您当前的位置：

首页 >

文章列表页 >

Effect of different porosity on thermally driven heat transfer in a centrifugal force field

更新时间：2026-07-07

- Effect of different porosity on thermally driven heat transfer in a centrifugal force field
- Vol. 21, Issue 6, (2006)
- 作者机构：
  
  南京航空航天大学能源与动力学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2006
- 稿件说明：
移动端阅览
XIA Jie, CHANG Hai-ping. Effect of different porosity on thermally driven heat transfer in a centrifugal force field[J]. 2006, 21(6).
DOI：

XIA Jie, CHANG Hai-ping. Effect of different porosity on thermally driven heat transfer in a centrifugal force field[J]. 2006, 21(6). DOI：

摘要

以涡轮叶片新型超级冷却技术的研究为背景

在具有冷却通道的新型冷却结构中加入多孔介质

采用实验与数值模拟相结合的方法研究了不同孔隙率条件下

新型冷却结构的热驱动换热规律

实验和计算结果基本一致。研究结果表明不同孔隙率条件下

该新型冷却结构具有相同的换热规律:随着旋转速度、热流密度和冷气进口速度的增大

该结构的热驱动换热能力逐渐增强。同时实验研究发现

随着孔隙率的增大

热驱动换热效果降低。

Abstract

Based on the background of the turbine blade super-cooling technology

porous medium was installed in a new kind of cooling configuration with cooling tunnels. Experiments and numerical simulations were carried out to investigate the thermally driven heat transfer rules in the new kind of cooling configuration with different porosity in a centrifugal force field.The results of experiments are basically consistent with that of the numerical simnlalions.Study shows that the heat transfer processes of the new cooling configuration are identical under different porosity.The thermally driven heat transfer of the cooling configuration filled with porous medium can be enhanced by increasing rotating speed

heat flux and cooling air speed.At the same time

the heat transfer effect is weakened with the increase of the porosity.

关键词

Keywords

references

Views

482

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Study effect of different thickness of porous layer on thermally driven heat transfer in a centrifugal force field

A porous medium model for simulating leakage flows through brush seals

Experimental Investigation on Thermo-Driving Heat Transfer in Porous Medium in a Centrifugal Force Field

Analysis of leakage flow through finger seal based on porous medium

Related Author

LU Si-da

GAO Xi-guang

SONG Ying-dong

XIA Jie

CHANG Hai-ping

CAO Guang-zhou

JI Hong-hu

YUAN Yan-ping

Related Institution

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

Avigation Theory Staff Room, The Air Force 13th Flight Academy, Bangbu

College of Energy and Power Engineering, Nanjing University of Aeronautics Astronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰