Influence of high aspect ratio convergent nozzle with different transition cross-section and nozzle shape on jets mixing characteristics

ZHANG Bo; JI Hong-hu

Chinese

您当前的位置：

首页 >

文章列表页 >

Influence of high aspect ratio convergent nozzle with different transition cross-section and nozzle shape on jets mixing characteristics

更新时间：2026-07-07

- Influence of high aspect ratio convergent nozzle with different transition cross-section and nozzle shape on jets mixing characteristics
- Vol. 22, Issue 3, (2007)
- 作者机构：
  
  南京航空航天大学能源与动力学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2007
- 稿件说明：
移动端阅览
ZHANG Bo, JI Hong-hu. Influence of high aspect ratio convergent nozzle with different transition cross-section and nozzle shape on jets mixing characteristics[J]. 2007, 22(3).
DOI：

ZHANG Bo, JI Hong-hu. Influence of high aspect ratio convergent nozzle with different transition cross-section and nozzle shape on jets mixing characteristics[J]. 2007, 22(3). DOI：

摘要

设计了一组宽高比为8的不同形式的矩形喷口

对其尾喷流掺混特性进行了数值模拟.通过改变圆到矩形过渡段的型面

在喷管出口下缘加装下挡板以及在侧面加装挡板

得到了4种不同形式的矩形喷管模型

分别在相同边界条件下研究了它们的射流掺混特性.结果表明

加装下档板和侧档板能够有效增强射流掺混

缩短射流高温区长度.

Abstract

The mixing characteristics of jets from four rectangular nozzles with aspect ratio of 8 were investigated by numerical simulation.The first and second nozzles had different transition sections from circular to rectangular

the third nozzle had a rectangular flip which was an extension of the bottom wall of nozzle exit on the base of the first one

while the last one had two triangular flips on the left and right sides of the nozzle exit on the base of the third one.The results show that the mixing characteristics of the two nozzles with different transition sections have little difference

while the flips cause strong mixing.

关键词

Keywords

references

Views

407

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Aerodynamic characteristics of design Mach number of 5 two-dimensional inlet with mixed-compression under typical condition

Computation of effect of different nozzle parameters on internal performance of convergent-divergent axisymmetric nozzle

Study of novel flow control concept for fix-geometry two-dimensional mix-compression supersonic inlet

Nonlinear dynamic response analysis of unbalance-rubbing coupling faults of rotor-ball bearing-stator coupling system

Related Author

LU Si-da

GAO Xi-guang

SONG Ying-dong

WENG Xiao-chai

GUO Rong-wei

ZHU Dan-dan

SHAO Wan-ren

WENG Xiao-chai

Related Institution

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

Unit 94710, the Chinese People's Liberation Army

Innovation Center for Advanced Aero-Engine

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰