Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints

LUO Gang; FAN Yin-he; LIANG You-jiang

Chinese

您当前的位置：

首页 >

文章列表页 >

Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints

更新时间：2026-07-07

- Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints
- Vol. 22, Issue 2, (2007)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院,南京,210016
  2. 沈阳航空发动机设计研究所,沈阳,110015
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2007
- 稿件说明：
移动端阅览
LUO Gang, FAN Yin-he, LIANG You-jiang. Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints[J]. 2007, 22(2).
DOI：

LUO Gang, FAN Yin-he, LIANG You-jiang. Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints[J]. 2007, 22(2). DOI：

摘要

针对航空喷气发动机机匣上安装座的焊接结构

建立了对接焊、错位对接焊、不等厚对接焊、新材料对接焊等4种焊接结构的有限元分析模型

利用ANSYS软件进行了应力分析

得到了4种焊接接头的应力集中系数;用“成组对比实验方法”进行了上述4种焊接结构的应力疲劳试验验证

预测了它们的寿命区间.疲劳试件的扫描电镜(SEM)断口分析表明

应力集中区域的焊接缺陷是影响疲劳寿命最主要的因素.

Abstract

In accordance with the welded structures on the mount-box of jet engine case

the finate element model(FEM) models of four kinds of welded joints including normal butt welding

dislocation butt welding

non-isopachous butt welding and new material butt welding are established.Stress analysis of these butt welding's is carried out by means of the finite element analysis software ANSYS

and the stress-concentration-coefficient of the four welded joints is obtained.The stress fatigue tests are implemented on the four kinds of butt welding pieces.The experimental results are analyzed and compared using the method of group comparison

and the fatigue life for the four kinds of butt welding is predicted.The result of the scanning electron microscope(SEM) fracture analysis indicated that the defection in the stress-concentrated area is the dominant factor to affect the fatigue life of the weld-joint.

关键词

Keywords

references

Views

485

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation on the ultimate strength of unidirectional tapes and plain cloth hybrid laminates

A integral parameter-based modeling method for 3D crack

Modeling of low-cycle and creep fatigue life for DZ125 smooth specimens and small-hole components

Design of simulated specimen for low-cycle fatigue of turbine engine disk

Experimental analysis of low-cycle and creep fatigue for directionally solidified DZ125 with a hole

Related Author

PENG Chao-yi

XIAO Jia-yu

ZENG Jing-cheng

JIANG Da-zhi

TANG Jun-xing

LU Shan

ZHOU Tian-peng

YANG Xiao-guang

Related Institution

College of Aerospace and Material Engineering, National University of Defense Technology

School of Power and Energy,Northwestern Polytechnical University

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics

Shenyang Aero Engine Research Institute

Shenyang Aeroengine Research Institute, China Aviation Industry Corporation Ⅰ

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰