Experimental study of fueling match on EBMC flame holder and frontal atomizing platelet injectors

MA Wen-jie; YANG Yang; LIU Yang; FAN Wei-jun; YANG Mao-lin

Chinese

您当前的位置：

首页 >

文章列表页 >

Experimental study of fueling match on EBMC flame holder and frontal atomizing platelet injectors

更新时间：2026-07-07

- Experimental study of fueling match on EBMC flame holder and frontal atomizing platelet injectors
- Vol. 22, Issue 12, (2007)
- 作者机构：
  
  北京航空航天大学能源与动力工程学院,北京,100083
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2007
- 稿件说明：
移动端阅览
MA Wen-jie, YANG Yang, LIU Yang, et al. Experimental study of fueling match on EBMC flame holder and frontal atomizing platelet injectors[J]. 2007, 22(12).
DOI：

MA Wen-jie, YANG Yang, LIU Yang, et al. Experimental study of fueling match on EBMC flame holder and frontal atomizing platelet injectors[J]. 2007, 22(12). DOI：

摘要

使用了一种作为主流供油的侧喷挡板喷油杆

研究了主流供油与尾缘吹气稳定器局部供油的燃油匹配规律

揭示了尾缘吹气稳定器的性能特点.同时

为了验证侧喷挡板这种新的燃油匹配方式是否具有优越性

使用两种不同型式的火焰稳定器作为主稳定器

将其与一种逆喷挡板匹配方式的燃烧性能进行了对比分析.结果表明

在试验参数范围内

使用吹气稳定器作为主稳定器

侧喷挡板的燃烧性能好于逆喷挡板.

Abstract

An experimental study on the fuel match of main fuel and local fuel of EBMC Flame holder was conducted using a main atomizing platelet injector.Meanwhile

the performance characteristics of EBMC Flame holder were presented.In order to demonstrate the advantage of this new type of atomizing platelet injector by which fuel was injected into the cross flow

two different types of flame holders were used as main flame holders.Its combustion performance was compared with that of atomizing platelet injector by which fuel was injected into the opposed flow.The experimental results show that combustion performance of the atomizing platelet injectors by which fuel was injected into the cross flow is superior to that of the other one within the range of operating conditions of this experiment.

关键词

Keywords

references

Views

482

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiment on spray characteristics of baffle-type injector in cross flow

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Aerodynamic characteristics of design Mach number of 5 two-dimensional inlet with mixed-compression under typical condition

Computation of effect of different nozzle parameters on internal performance of convergent-divergent axisymmetric nozzle

Study of novel flow control concept for fix-geometry two-dimensional mix-compression supersonic inlet

Related Author

LI Rui-ming

XING Fei

LU Si-da

GAO Xi-guang

SONG Ying-dong

WENG Xiao-chai

GUO Rong-wei

ZHU Dan-dan

Related Institution

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

Unit 94710, the Chinese People's Liberation Army

Innovation Center for Advanced Aero-Engine

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰