Thermal performance of staggered mini-duct heat sinks

ZOU Jiang; PENG Xiao-feng; YAN Wei-mou

Chinese

您当前的位置：

首页 >

文章列表页 >

Thermal performance of staggered mini-duct heat sinks

更新时间：2026-07-07

- Thermal performance of staggered mini-duct heat sinks
- Vol. 23, Issue 5, (2008)
- 作者机构：
  
  1. 清华大学相变与界面传递现象实验室,北京,100084
  2. 台湾华梵大学机电工程系,台湾,台北,223
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2008
- 稿件说明：
移动端阅览
ZOU Jiang, PENG Xiao-feng, YAN Wei-mou. Thermal performance of staggered mini-duct heat sinks[J]. 2008, 23(5).
DOI：

ZOU Jiang, PENG Xiao-feng, YAN Wei-mou. Thermal performance of staggered mini-duct heat sinks[J]. 2008, 23(5). DOI：

摘要

实验研究微小交错流道散热块的传热性能以及热阻系数.随着Re数增加

交错流道与直通流道内流动换热性能均会升高

前者的变化更加显著

对流热阻系数与Re数接近指数关系;相同Re数条件下

交错流道对流热阻系数约比直通流道下降18%.散热块底面温度分布明显不一致

流体轴向温升对温度分布影响显著

温度在空间与时间上均有波动;预测交错流道在Re数为700左右开始发生流动转捩.

Abstract

Experimental investigation was conducted to study the thermal performance and thermal resistance factor of staggered mini-duct heat sinks.With Reynolds number increasing

the performance of both staggered ducts and straight ducts are improved

and the former is more evident and significant.The thermal resistance factor has an exponential relation with Re;and at the same Re

the factor of staggered ducts is about 18% lower than that of straight ducts.The temperature profile of heat sink bottom is distinctly non-uniform

mainly caused by the fluid temperature rise along the flow

and it fluctuates spatially and temporally.The flow in staggered ducts would lose its stability at about Re 700

much lower than normal cases.

关键词

Keywords

references

Views

465

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Heat transfer enhancement mechanism of transverse direction type serrated fin in turbulent flow based on field synergy principle

Prediction method on equivalent thermal conductivity coefficient of plain braided C/SiC composites material based on finite element method

Aerodynamic characteristics of design Mach number of 5 two-dimensional inlet with mixed-compression under typical condition

Computation of effect of different nozzle parameters on internal performance of convergent-divergent axisymmetric nozzle

Study of novel flow control concept for fix-geometry two-dimensional mix-compression supersonic inlet

Related Author

LI Juan

LING Xiang

PENG Hao

LU Si-da

GAO Xi-guang

SONG Ying-dong

WENG Xiao-chai

GUO Rong-wei

Related Institution

School of Mechanical and Power Engineering, Nanjing University of Technology

School of Mechanical and Electronic Engineering, Nanjing Forestry University

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Department of Power and Propulsion, School of Engineering, Cranfield University, Bedfordshire MK4

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰