A new air-cooled turbine blade profile with depression feature at leading edge was presented in this paper.The flow field of this blade profile at the transonic condition was simulated in detail.The change of vortex position induced by the leading edge cooling air injection along the blade profile was observed.The aerodynamic characteristics of the new blade
such as film effectiveness
energy loss and pressure field
were compared with the traditional air-cooled turbine blade.The result shows that this new blade locks up the vortex induced by the leading edge cooling air injection in its depression part.The mixing of cooling air and mainstream becomes weak.Thus
the number of the leading edge cooling air injection holes can be reduced along with the decreasing amount of injection.
Aerodynamic characteristics and lift enhancement mechanism of mini-TED in transonic flow
Analysis on tip flow structure in transonic fan rotor
Effect of bulk swirl on performance and stability of transonic single rotor
Numerical simulation on stall margin improvement of transonic compressor by a trapped vortex casing treatment
Aerodynamic performance of tip leakage flow of two different blade tips in transonic turbine
Related Author
CUI Zhao
LI Jian-bo
DING Dong-jian
JI Le-qiang
XIA Shu-dan
MAO Xiao-chen
CAO Zhi-yuan
LIU Bo
Related Institution
National Key Laboratory of Science and Technology on Rotorcraft Aeromechanics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics
School of Power and Energy,Northwestern Polytechnical University
Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics
Collaborative Innovation Center for Advanced Aero-Engine
Research Institute of Unmanned Aerial Vehicle, Beijing University of Aeronautics and Astronautics