Several jet array impingement experimental models with different holes spacing were designed to investigate the effects of impinging jet Reynolds number and geometry parameters on the local heat transfer enhancement by using the transient Infrared thermography method.The results show that:(1)the heat transfer coefficient increases with the increasing of impinging jet Reynolds number
(2)the heat transfer enhancement becomes weaken when the jet holes spacing or jet impinging distance increase
and(3) in the case of jet holes spacing ratio arranged from 3 to 5
the heat transfer enhancement for inline jet array is higher than that of staggered jet array
but in the case of jet holes spacing ratio is 2
the heat transfer enhancement for the inline jet array is higher in the front jet rows but lower in the rear jet rows compared with staggered jet array.
Impingement cooling experiment of structured surface with micro-W-shaped ribs
Experiment and numerical computation of impingement cooling in narrow space with pin fins
Numerical simulation of flow and heat transfer in internal cooling blade channel with leading-edge
Convective heat transfer characteristics of impingement cooling for a self-excited precessing jet
Experimental research on jet impingement inside semi-confined rib-roughed channel
Related Author
万超一
饶宇
陈鹏
CHEN Peng
WAN Chao-yi
RAO Yu
LIU Yu-sheng
WU Hong
Related Institution
上海交通大学 机械与动力工程学院 叶轮机械研究所
Institute of Turbomachinery, School of Mechanical Engineering, Shanghai Jiao Tong University
National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics,School of Jet Propulsion, Beijing University of Aeronautics and Astronautics
College of Metrology and Measurement Engineering, China Jiliang University
College of Astronautics,Nanjing University of Aeronautics and Astronautics