Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup
|更新时间:2026-07-07
|
Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup
Vol. 24, Issue 11, (2009)
作者机构:
1. 北京航空航天大学能源与动力工程学院 航空发动机气动热力科技重点实验室,北京,100191
2. 中国航空工业集团公司沈阳航空发动机设计研究所,沈阳,110015
作者简介:
基金信息:
DOI:
CLC:
Published:2009
稿件说明:
移动端阅览
YU Jin-feng, GUO Zhi-hui, ZHANG Jun-feng, et al. Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup[J]. 2009, 24(11).
DOI:
YU Jin-feng, GUO Zhi-hui, ZHANG Jun-feng, et al. Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup[J]. 2009, 24(11).DOI:
Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup
The two-phase flow field of combustor dome with double swirlers
venturi and flare sleeve was studied experimentally using two-dimensional particle dynamics analyzer(PDA).The velocities
diameter
volume flux of droplets were measured
while the effects of the flare sleeve length on the flow field and atomization were analyzed.The flowfield downstream created by flare sleeves with different lengths is of the same structure
which includes central recirculation zone and corner recirculation zone.The flare sleeve length controls the development of flow field and affects the attachment point of the flow
which moves downstream with the increase of the length.The size of the recirculation zone is biggest when the flare sleeve length reaches a critical value.The Sauter mean diameters(SMD) produced by the shortest flare sleeve are smallest in the recirculation zone
showing good atomization.The atomization improves outside the recirculation zone with the increase of the flare sleeve length.The spray cone angle decreases with the increase of the flare sleeve length.The selection of the optimum sleeve length depends on the needs of combustion performances.