The numerical simulation has been carried out to investigate the effect of the center-body with of different equivalent widths (from 0.3 to 0.8
interval 0.05) in the trapped vortex combustor under four different inlet conditions
so as to select the width of the center-body in the trapped vortex combustor. The results show there is a proper scale of the width to establish the low velocity and steady flow region in the trapped vortex cavity. The total pressure loss at the combustor outlet increases with rising center-body width.
Numerical simulation on a certain trapped vortex combustor
Simulation method of short crack propagation in turbine disks based on crystal plasticity
Numerical simulation of internal flow field in gas generator of fire extinguishing bomb
Numerical simulation of light-craft effects onlaser supported donation wave with gas-liquid two phase propellant
Low-Reynolds-number wake flows of a triangular prism
Related Author
ZHAI Xiao-lei
PENG Ri-liang
FAN Wei-jun
ZHANG Rong-chun
WANG Wei-jian
Ping ZHANG
Shan LU
Xin JING
Related Institution
National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics
Datang International Yungang Thermal Power Limited Liability Company, Datang International Power Generation Corporation Limited
School of Power and Energy,Northwestern Polytechnical University
Nondestructive Testing and Evaluation Laboratory, Dalian University of Technology
College of Civil Engineering, Hefei University of Technology