Numerical investigation on film cooling effectiveness at suction surface of stator blade

YAO Yu; ZHANG Jing-zhou; HE Fei; GUO Wen

Chinese

您当前的位置：

首页 >

文章列表页 >

Numerical investigation on film cooling effectiveness at suction surface of stator blade

更新时间：2026-07-07

- Numerical investigation on film cooling effectiveness at suction surface of stator blade
- Vol. 25, Issue 6, (2010)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院,南京,210016
  2. 洪都航空工业集团飞机设计研究所,南昌,330024
  3. 中国航空工业集团公司中国燃气涡轮研究院,成都,610500
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2010
- 稿件说明：
移动端阅览
YAO Yu, ZHANG Jing-zhou, HE Fei, et al. Numerical investigation on film cooling effectiveness at suction surface of stator blade[J]. 2010, 25(6).
DOI：

YAO Yu, ZHANG Jing-zhou, HE Fei, et al. Numerical investigation on film cooling effectiveness at suction surface of stator blade[J]. 2010, 25(6). DOI：

摘要

针对某型导向叶片

运用RNG(renormalization group)湍流模型对涡轮叶栅通道内部的三维流场和叶片吸力面的冷却效率进行了数值模拟.分析在叶栅通道主流入口雷诺数Re=4×105～6×105和冷气吹风比M=0.5～3范围内

沿吸力面不同弦向位置处开设气膜孔对气膜冷却效率的影响.结果表明:各位置气膜孔单独喷射时叶片吸力面的冷却效率均随着入口雷诺数的增加而增大;在气膜孔出口下游附近

冷却效率随着吹风比的增加先升高后降低

在下游远处则一直随着吹风比的增加而增大;三个位置处气膜孔单独喷射时

位置1气膜孔的冷却效率较位置2和位置3的高.

Abstract

The film cooling characteristics of blade surface were numerically investigated using the two-equation turbulence model of the renormalization group.Three-dimensional turbulent flow in turbine cascade and the cooling effectiveness on blade surface were studied under different Reynolds numbers and blowing ratios.The influence of the cooling effectiveness of cylindrical film cooling holes on the blade suction surface with varying location was investigated.Results show that the cooling effectiveness for each film cooling hole increases with the increment of the mainstream Reynolds numbers.The cooling effectiveness downstream the exit of holes changes obviously with the increment of blowing ratio

and away from the downstream the effectiveness keeps increasing with the increment of blowing ratio.Under the same condition the cooling effectiveness of location 1 was higher than other two locations.

关键词

Keywords

references

Views

479

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation of film cooling effectiveness with one inlet and double outlet hole on leading edge

Experimental investigation of rotating single-hole film cooling performance on suction side of a turbine blade

Numerical simulation of cooling effectiveness with injection of double-outlet hole

Numerical investigation on film cooling effectiveness of stator blade with or without heat transfer

Numerical study of cooling effectiveness of different film cooling holes on stator blade

Related Author

LI Guang-chao

ZHANG Wei

WANG Cheng-jun

PENG Da-wei

WANG Jian-ming

XU Zhi-hui

LI Guo-qing

DENG Hong-wu

Related Institution

Liaoning Key Laboratory of Digital Technology Simulation and Test Technique, School of Aero Dynamics and Energy Engineering, Shenyang Aerospace University

National Key Laboratory of Science and Technology on Aero-Engines, School of Jet Propulsion, Beijing University of Aeronautics and Astronautics

School of Aerodynamics and Energy Engineering,Shenyang Institute of Aeronautical Engineering

China Gas Turbine Establishment

School of Power and Energy,Northwestern Polytechnical University

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰