Because the distance between combustion zone and wall is very short
the overhigh wall temperature is a longstanding problem of trapped vortex combustor(TVC)
which limits the actual application of TVC.The experimental study of wall temperature distribution on the TVC was reported in the paper
and the influences of fuel supply quantity and inlet parameters of main stream on the wall temperature distribution were investigated.Meanwhile
the rationality of cooling structure and air jet entrance structure was analyzed.The test results show that the hot spot temperature of combustor appears in the after-wall.The distribution of wall temperature is greatly influenced by the fuel supply quantity and the mach number of main stream
but little influenced by the temperature of main stream.
Experimental study of wall temperature distribution on annular interstage trapped vortex combustor
Numerical simulation on a certain trapped vortex combustor
Impact of mainstream on the vortex flow of cavity in trapped vortex combustor
Effect of lean blowout performance of trapped vortex combustor of the afterburner
Flame structure in supersonic combustion chamber based on 500 Hz OH-PLIF technology,
Related Author
ZHANG Rong-chun
FAN Wei-jun
XING Fei
ZHAI Xiao-lei
PENG Ri-liang
FAN Wei-jun
ZHANG Rong-chun
WANG Wei-jian
Related Institution
National Key Laboratory of Science and Technology on Aero-Engines,School of Jet Propulsion,Beijing University of Aeronautics and Astronautics
Datang International Yungang Thermal Power Limited Liability Company, Datang International Power Generation Corporation Limited
National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics
School of Jet Propulsion, Beijing University of Aeronautics and Astronautics
Sichuan Gas Turbine Establishment,Aero Engine Corporation of China