Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel
|更新时间:2026-07-07
|
Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel
Vol. 25, Issue 7, (2010)
作者机构:
西北工业大学 力学与土木建筑学院工程力学系,西安,710129
作者简介:
基金信息:
DOI:
CLC:
Published:2010
稿件说明:
移动端阅览
DENG Ding-yuan, GAO Hang-shan, YU Kua-hai, et al. Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel[J]. 2010, 25(7).
DOI:
DENG Ding-yuan, GAO Hang-shan, YU Kua-hai, et al. Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel[J]. 2010, 25(7).DOI:
Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel
Numerical simulation was conducted to investigate the flow and heat transfer performance of elliptical pin-fin arrays in turbine blade cooling channel.Then
the impacts of array spacing
angle of attack
ratio of long axis and short axis on flow and heat transfer in pin-fins channel were obtained.The result indicates that
when the angle of attack is 0°
the pressure loss coefficient and average Nusselt number of elliptical pin-fins channel is about 51.7% and 83.75%
respectively
of the same fin section-area and arrays circular pin-fins channel;when the ratio of long axis and short axis is 5/1.8
the pressure loss coefficient is only 28.1%~35.5% of circular pin-fins channel(ratio of long axis and short axis is 3/3)
and average Nusselt number is 71.1%~75.06% of circular pin-fins channel.