The mixing characteristics of two different kinds of fluids with non-reaction in the lobed injector were numerically studied by using FLUENT CFD(computational fluid dynamics) software. The primary flow (CO2) was injected from the lobed slot between two corrugated plates
and then mixed with the coflowing secondary flow (air) in the mixing duct. The velocity fields
streamwise vortice structures and species distribution were obtained to analyze the effects of lobed injector parameters on the circulation intensity of streamwise vortices. The streamwise vortices induced by the lobed injector are helpful to improve the mixing efficiency of the two coflowing fluids
Effect of fuel nozzle position on pollutant generation performance of combustor
Effect of air cooled radial stabilizator opening angle on performance of the mixer and diffuser.
Numerical study on cross-type multi-stream plate-fin heat exchanger
Effect of chamber structure on fuel regression rate and performance of hybrid rocket motor
Two-phase flow numerical calculation of HO/HTPB hybrid rocket engine with diaphragm in grain
Related Author
Haoran LI
Xuanren CHEN
Haoyang YU
Xiaodong MAO
Jian HU
Aiguo LIU
周开福
刘友宏
Related Institution
Hunan Aviation Powerplant Research Institute, Aero Engine Corporation of China
Key Laboratory of Advanced Measurement and Test Technique for Aviation;Propulsion System,Liaoning Province,Shenyang Aerospace University
北京航空航天大学 能源与动力工程学院
Aviation Key Laboratory of Science and Technology on Aero Electromechanical System Integration, Nanjing Engineering Institute of Aircraft Systems, Jincheng, Aviation Industry Corporation of China
College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics