Influence of single square pulse injection on restart characteristics for mixed-compression inlet
|更新时间:2026-07-07
|
Influence of single square pulse injection on restart characteristics for mixed-compression inlet
Vol. 26, Issue 10, (2011)
作者机构:
国防科学技术大学 航天与材料工程学院,长沙,410073
作者简介:
基金信息:
DOI:
CLC:
Published:2011
稿件说明:
移动端阅览
YOU Jin, XIA Zhi-xun, FANG Chuan-bo, et al. Influence of single square pulse injection on restart characteristics for mixed-compression inlet[J]. 2011, 26(10).
DOI:
YOU Jin, XIA Zhi-xun, FANG Chuan-bo, et al. Influence of single square pulse injection on restart characteristics for mixed-compression inlet[J]. 2011, 26(10).DOI:
Influence of single square pulse injection on restart characteristics for mixed-compression inlet
The unsteady numerical study of the mixed-compression inlet restarting flow with the single square pulse injection was performed.The results show that mass flow entering the inlet decreased and external normal shock is swallowed into lip with the joining of the injection on ramp
because of the blockage of the jet to incoming flow.As the mass flow of jet exceeds the threshold value of 5% of inlet mass flow
and the duration time of injection is less than 15ms
needing at least 0.0014kg gas for injection
the unstart flow of inlet will restart.And a high-frequency oscillation flow with 135Hz arises when the mass flow of jet is less lightly than the threshold value.The duration time for restart and total gas mass reduce with the increase of mass flow of jet because of the faster flow response when the mass flow of jet exceeds the threshold value.