Effects of airflow split and primary holes arrangement on the lean blowout limits of a combustor with axial-radial swirl cup

XIE Fa; HUANG Yong; MIAO Hui; HU Bin

Chinese

您当前的位置：

首页 >

文章列表页 >

Effects of airflow split and primary holes arrangement on the lean blowout limits of a combustor with axial-radial swirl cup

更新时间：2026-07-07

- Effects of airflow split and primary holes arrangement on the lean blowout limits of a combustor with axial-radial swirl cup
- Vol. 26, Issue 8, (2011)
- 作者机构：
  
  北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京,100191
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2011
- 稿件说明：
移动端阅览
XIE Fa, HUANG Yong, MIAO Hui, et al. Effects of airflow split and primary holes arrangement on the lean blowout limits of a combustor with axial-radial swirl cup[J]. 2011, 26(8).
DOI：

XIE Fa, HUANG Yong, MIAO Hui, et al. Effects of airflow split and primary holes arrangement on the lean blowout limits of a combustor with axial-radial swirl cup[J]. 2011, 26(8). DOI：

摘要

针对轴径向旋流杯燃烧室

研究了头部进气面积及主燃孔布局对此类燃烧室贫熄特性的影响.实验结果表明:减小一级轴向旋流器进气面积和增加主燃孔个数对燃烧室贫熄性能有较大影响.一级进气面积减小20%可拓宽贫熄边界9.7%;增加主燃孔为4个时

燃烧室贫熄边界变宽约7.6%.此外

增加一级进气面积20%

改变二级进气面积20%及改变主燃孔个数为2个等情况对燃烧室贫熄边界影响较小.

Abstract

An experiment was conducted for studying the effect of the variations of dome air entry areas and the arrangements of primary holes on the lean blowout (LBO) limits of a single dome rectangular model combustor with axial-radial swirl cup.The experimental results show that the decrease of air entry areas of the primary axial-swirler and the increase of primary holes' number have great effect on the LBO limits of the combustors.Decreasing of air entry areas into the primary axial-swirler by 20% will improve the combustor lean blowout limits about 9.7%

and increase of the number of primary holes to 4 will improve the combustor lean blowout limits about 7.6%.Besides

increase of air entry areas into the primary axial-swirler by 20%

change of air entry areas into the secondary radial-swirler by 20% and change of the number of primary holes to 2 have little effect on the combustor LBO limits.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influencing factors of the lean blowout of alternative fuels

Experiment on effect of triple axial swirler on combustor performance

Experiment on lean blowout performance of triple axial swirler combustor

Lean blowout mechanism of coupled recirculation zone in concentric staged combustor

Numerical prediction of lean blowout in aero-engine combustor

Related Author

周文杰

张捷

杨晓奕

DING Guo-yu

HE Xiao-min

ZHAO Zi-qiang

ZHU Zhi-xin

GE Jia-wei

Related Institution

北京航空航天大学能源与动力工程学院

Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics

Harbin Dongan Engine (Group) Corporation Limited

National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics

College of Mechanical Engineering, Nanjing University of Science and Technology

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰