Application of damping ratio for turbine blades by modal testingon finite element analysis

WANG Chun-jian; CHEN Guan-feng; QING Hua

Chinese

您当前的位置：

首页 >

文章列表页 >

Application of damping ratio for turbine blades by modal testingon finite element analysis

更新时间：2026-07-07

- Application of damping ratio for turbine blades by modal testingon finite element analysis
- Vol. 27, Issue 2, (2012)
- 作者机构：
  
  中国航空工业集团公司中国燃气涡轮研究院,成都,610500
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
WANG Chun-jian, CHEN Guan-feng, QING Hua. Application of damping ratio for turbine blades by modal testingon finite element analysis[J]. 2012, 27(2).
DOI：

WANG Chun-jian, CHEN Guan-feng, QING Hua. Application of damping ratio for turbine blades by modal testingon finite element analysis[J]. 2012, 27(2). DOI：

摘要

为了更加精确地通过有限元来模拟涡轮叶片的谐响应特性

剖析了有限元分析中阻尼矩阵的构建方法

并且选定了适用于真实涡轮叶片设计的阻尼矩阵模型.在进行涡轮叶片有限元谐响应计算时

以模态测试得的阻尼比为基本参数

建立构建阻尼矩阵的方法

该方法能处理具有单独共振频率或具有临近共振频率的振动问题.通过模拟涡轮叶片的响应试验

测得了试验系统的阻尼比及模拟涡轮叶片的位移响应.根据测得的系统阻尼比

运用构建阻尼矩阵的方法

对具有单独共振频率特征的模拟涡轮叶片进行了谐响应计算

结果显示模拟涡轮叶片的位移响应与试验结果基本一致.运用该方法进行涡轮叶片的谐响应分析可比较精确地得到其谐响应特性.

Abstract

For more accurately imitating turbine blade’s harmonic response characteristic by using finite element method

studied how to genetate damping matrix on finite element analysis

and selected a damping matrix model which was suitable for the design of real turbine blades. In the finite element harmonic response analysis of turbine blade

a method for generating damping matrix was made on the basis of the damping ratio which was measured in modal testing. The method can be used for any individual resonance frequency problem or coupling resonance frequency problem. After imitated turbine blade’s response experimentation

system damping ratio and imitated turbine blade’s displacement response was measured. According to the system damping ratio and the method

analyzed imitated turbine blade’s harmonic response which had individual resonance frequency. The analysis result indicate that the imitated turbine blade’s response is approximately consonant with the experimental result. So it is accurate that using the method to analyze harmonic response of turbine blade.

关键词

Keywords

references

Views

589

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Cooling characteristics of pin-fin arrays with non-uniform diameters

Contact stress calculation and static strength analysis of zig-zag shrouded blade

Numerical analysis on residual stress of foreign object damage on the leading edge of titanium alloy blade

Approach to early crack diagnosis of turbine blade based on EEMD energy entropy fusion of three-dimensional tip clearance

Rib influence on heat transfer and pressure drop in pin-fin array

Related Author

BAI Wandong

LIANG Dong

CHEN Wei

SHEN Xiuli

GAO Pengxin

DONG Shaojing

ZHAO Zhenhua

ZHANG Junhe

Related Institution

School of Aeronautics and Astronautics,Sichuan University

北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室

先进航空发动机协同创新中心

大连民族大学机电工程学院

大连民族大学智能感知与先进控制国家民委重点实验室

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰