Experiment on flow and heat transfer characteristics in trapezoidal passage of turbine blade trailing with different pin-fins

TAN Xiao-ming; HU Xun-yao; ZHANG Jing-zhou

Chinese

您当前的位置：

首页 >

文章列表页 >

Experiment on flow and heat transfer characteristics in trapezoidal passage of turbine blade trailing with different pin-fins

更新时间：2026-07-07

- Experiment on flow and heat transfer characteristics in trapezoidal passage of turbine blade trailing with different pin-fins
- Vol. 27, Issue 2, (2012)
- 作者机构：
  
  南京航空航天大学能源与动力学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
TAN Xiao-ming, HU Xun-yao, ZHANG Jing-zhou. Experiment on flow and heat transfer characteristics in trapezoidal passage of turbine blade trailing with different pin-fins[J]. 2012, 27(2).
DOI：

TAN Xiao-ming, HU Xun-yao, ZHANG Jing-zhou. Experiment on flow and heat transfer characteristics in trapezoidal passage of turbine blade trailing with different pin-fins[J]. 2012, 27(2). DOI：

摘要

针对叶片尾缘梯形通道内叉排排列的圆形、椭圆形、水滴形和哑铃形扰流柱的流动换热特性进行了实验研究.研究结果表明:在相同的进口雷诺数情况下

水滴形扰流柱的通道压力损失最小

仅为圆形扰流柱的57%;圆形扰流柱和哑铃形扰流柱的换热效果差异不大

比椭圆形扰流柱的换热效果高约20%

比水滴形扰流柱的换热效果高25%左右;进口结构形式对流动换热特性的影响不是非常明显

双排小孔的挡板通道内压力较大

但是换热效果也相对较好.

Abstract

Experimental study was carried out to analyze the flow and heat transfer characteristic of trapezoidal channel fitted with staggered arrays of circle

ellipse

dumbbell and water-drop shaped pin fins.The results show that:with the same Reynolds number of inlet flow

the pressure loss of drop-shaped pin fins is about 57% of that of the circle pin fins.The cooling effect of the circle pin-fins was almost the same with dumbbell pin-fins which is 20% higher than that of elliptical pin-fins and 25% higher than that of drop-shaped pin-fins.The differences of the flow and heat transfer features of different inlet shapes were not distinct.The inlet flow through double arrays of holes had the higher pressure and better cooling effect in trapezoidal passage.

关键词

Keywords

references

Views

499

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influence of slit type receiver holes on radial pre-swirl system

Influence of tube length on flow resistance and temperature reduction characteristics of tubed vortex reducer

Numerical calculation of flow characteristics of hybrid vortex reduce structure combing de-swirl inlet

Influence of air entraining position on radial pre-swirl system

Effect of thermal radiation on the heat transfer performance of a film cooling vane

Related Author

HOU Xiaoting

WANG Suofang

ZHANG Kai

XIA Zilong

屠泽灿

王龙飞

魏嵩

范俊

Related Institution

陆军航空兵学院陆军航空兵研究所

南京航空航天大学能源与动力学院江苏省航空动力系统重点实验室

南京航空航天大学能源与动力学院

中国航空发动机集团有限公司四川燃气涡轮研究院

先进航空发动机协同创新中心

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰