Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite
|更新时间:2026-07-07
|
Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite
Vol. 27, Issue 9, (2012)
作者机构:
南京航空航天大学 能源与动力学院,南京,210016
作者简介:
基金信息:
DOI:
CLC:
Published:2012
稿件说明:
移动端阅览
SUN Zhi-gang, MIAO Yan, SONG Ying-dong. Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite[J]. 2012, 27(9).
DOI:
SUN Zhi-gang, MIAO Yan, SONG Ying-dong. Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite[J]. 2012, 27(9).DOI:
Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite
The matrix random cracking of ceramic matrix composite was simulated by Montel Carlo model.The shear-lag model was used to analyze the micro-stress field of the damaged composites
and the formula of the stress-strain behavior was derived.The uniaxial tensile experiment of unidirectional-C/SiC composites at ambient temperature has been performed
and the simulated stress-strain curve was compared to the experimental data.The tensile stress-strain curves of SiC/CAS and SiC/Si3N4 composites were simulated
which agreed well with the related experimental results.Besides
infuence of the model parameters on stress-strain curve was analyzed.Research shows that the higher the Weibull modulus
the more evident the non-linear phenomenon;the higher the thermal residual stress
the earlier the non-linear phenomenon appears;the effect of the minimum cracking stress on the stress-strain is similar to the effect of the Weibull modulus;the Monte Carlo model can simulate the stress-strain curve of ceramic matrix composites efficiently.