Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs

LI Chun-lin; ZHU Hui-ren; BAI Jiang-tao; DU Xiao-qin; ZHOU Lei-sheng

Chinese

您当前的位置：

首页 >

文章列表页 >

Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs

更新时间：2026-07-07

- Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs
- Vol. 27, Issue 6, (2012)
- 作者机构：
  
  西北工业大学动力与能源学院,西安,710072
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
LI Chun-lin, ZHU Hui-ren, BAI Jiang-tao, et al. Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs[J]. 2012, 27(6).
DOI：

LI Chun-lin, ZHU Hui-ren, BAI Jiang-tao, et al. Effect of film cooling hole entrance position on film cooling characters in the cross-flow passage with ribs[J]. 2012, 27(6). DOI：

摘要

采用数值模拟方法研究了横流通道中气膜孔与肋的相对位置对气膜冷却传热系数和冷却效率的影响.分析了吹风比为0.5

横流比为0.39

0.585

0.78时孔靠近上游肋、下游肋以及在两肋中间时对冷却效果的影响

研究结果表明:孔位于两肋中间时

气体进入孔时受的冲击较大

外表面传热系数和冷却效率较高;孔靠近上游肋时

气体孔内流动更加均匀

外表面传热系数和冷却效率均较低.

Abstract

Effect of the relative position between film cooling holes and ribs on the film cooling effectiveness and heat transfer in a channel with cross-flow and ribs was investigated numerically.The effect of position where film cooling holes were close to upstream ribs

downstream ribs and in the middle region of ribs on the cooling effect was studied with blowing ratio of 0.5

1 and 2

with cross-flow ratio of 0.39

0.585 and 0.78.The results show that

in the case of the film cooling hole entrance in the middle of two ribs

the flow in the hole are influenced heavily by the entrance jet

the heat transfer coefficient and film cooling effectiveness are higher.In the case of the film cooling hole entrance near the up-stream rib

the heat transfer coefficient and film cooling effectiveness are lower.

关键词

Keywords

references

Views

516

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Flow field and film cooling characteristics in supersonic turbine cascade

Numerical simulation of film cooling effectiveness with one inlet and double outlet hole on leading edge

Numerical simulation of cooling effectiveness with injection of double-outlet hole

Numerical studies about the discharge coefficient of film cooling hole at narrow space

Numerical study on adiabatic wall cooling effectiveness and convective heat transfer coefficient of effusion cooling

Related Author

CHEN Si-jie

SHAN Yong

ZHANG Jing-zhou

TAN Xiao-ming

FEI Wei-wei

LI Guang-chao

ZHANG Wei

WANG Cheng-jun

Related Institution

College of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics

Liaoning Key Laboratory of Digital Technology Simulation and Test Technique, School of Aero Dynamics and Energy Engineering, Shenyang Aerospace University

School of Aerodynamics and Energy Engineering,Shenyang Institute of Aeronautical Engineering

Shanghai Vocational School of Civil Aviation Administration of China

School of Power Engineering, Nanjing Normal University

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰