Theory analysis for application grinding disk in face gear grinding

PENG Xian-long; FANG Zong-de; SU Jin-zhan; PEI Shan-shan

Chinese

您当前的位置：

首页 >

文章列表页 >

Theory analysis for application grinding disk in face gear grinding

更新时间：2026-07-07

- Theory analysis for application grinding disk in face gear grinding
- Vol. 27, Issue 5, (2012)
- 作者机构：
  
  1. 西北工业大学机电学院,西安,710072
  2. 中国兵器工业集团公司西北机电工程研究所,陕西,咸阳,712099
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
PENG Xian-long, FANG Zong-de, SU Jin-zhan, et al. Theory analysis for application grinding disk in face gear grinding[J]. 2012, 27(5).
DOI：

PENG Xian-long, FANG Zong-de, SU Jin-zhan, et al. Theory analysis for application grinding disk in face gear grinding[J]. 2012, 27(5). DOI：

摘要

为了制造出高精度硬齿面面齿轮和获得抛物线传动误差并提高传动稳定性

提出一种采用碟形砂轮加工面齿轮的磨齿方法.分析了碟形砂轮磨削面齿轮的展成原理和碟形砂轮的运动

根据展成原理推导了碟形砂轮的齿面方程

使用渐开线失配的碟形砂轮和改变砂轮的运动

推导出双向修形面齿轮的齿面方程.建立了双向修形面齿轮和常规渐开线小齿轮啮合的齿面接触分析模型

齿面计算和齿面接触分析实例表明

采用碟形砂轮加工双向修形面齿轮的磨齿方法是可行的

获得了面齿轮抛物线传动误差

避免了边缘接触并提高了传动的稳定性.

Abstract

A method of tooth grinding for face gear machining by using grinding disk was proposed with the purpose to manufacture hardened face gear with high precision and obtain parabolic transmission errors and increase transmission stability.The generation theory and grinding disk motion of face gear abraded by grinding disk were analyzed

the surface equation of grinding disk was deduced according to the generation theory

and the double crowned tooth surface equation of face gear was derived based on using grinding disk with mismatch involute and modified movement of grinding disk.The model of tooth contact analysis of double crowned face gear meshing with traditional involute pinion was established.Instances of tooth surface calculation and tooth contact analysis indicate that the method of gear grinding applied to manufacture double crowned face gear through grinding disk is feasible

parabolic transmission errors of face gear can be obtained

edge contact is avoided and is enhanced the stability of transmission.

关键词

Keywords

references

Views

525

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Active design of face gear drive for modifying ease-off topology flank

Tooth surface design and undercutting research of offset orthogonal arc tooth face gear

Tooth profile error measurement of face gear based on general coordinate measuring machine

Design method and its misaligned contact characteristic of aviation crowned spline

Static load sharing characteristic of twice load splitgear transmission configuration

Related Author

HU Xi-wen

Chao LUO

Guangjin XIONG

Zhanrong FENG

Lingfeng GAO

Jinyuan TANG

Yuhui HE

Shenghui WANG

Related Institution

Chemical Research Institute, China Nuclear Power Engineering Company Limited

School of Aeronautical Manufacturing Engineering， Nanchang Hangkong University

College of Mechanical and Electrical Engineering， Central South University

State Key Laboratory of High Performance Complex Manufacturing， Central South University

Shenyang Engine Research Institute，Aero Engine Corporation of China

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰