Numerical simulation of flow and heat transfer performances in a direct transfer pre-swirl system

LUO Xiang; FENG Ye; XU Guo-qiang; ZHAO Xi; ZHAO Nan

Chinese

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of flow and heat transfer performances in a direct transfer pre-swirl system

更新时间：2026-07-07

- Numerical simulation of flow and heat transfer performances in a direct transfer pre-swirl system
- Vol. 27, Issue 10, (2012)
- 作者机构：
  
  北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京,100191
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
LUO Xiang, FENG Ye, XU Guo-qiang, et al. Numerical simulation of flow and heat transfer performances in a direct transfer pre-swirl system[J]. 2012, 27(10).
DOI：

LUO Xiang, FENG Ye, XU Guo-qiang, et al. Numerical simulation of flow and heat transfer performances in a direct transfer pre-swirl system[J]. 2012, 27(10). DOI：

摘要

采用CFD商业软件FLUENT分别从维度模型和湍流模型两个角度对接近真实的高压涡轮旋转盘腔进行数值模拟

研究了一种直接供气预旋转静系旋转盘腔模型内的流动和换热特性.通过计算研究发现:低位腔内的流动仅由中心入流控制

二维计算不能反映高位腔内中心入流与预旋入流的掺混;二维和三维计算所得的腔内压力分布相似

实验值介于两者之间;主盘面的换热主要受中心入流控制

二维和三维计算差别不大

Realizable k-ε湍流模型在定性和定量上均能更好地反映换热实验结果.

Abstract

In order to investigate the flow and heat transfer performances in a direct transfer pre-swirl system

a numerical study was conducted by using CFD commercial software FLUENT with dimensional model and turbulence model respectively.Through the comparison

the following conclusions can be drawn:flow of the lower cavity is determined by the central inflow

and the two-dimensional computation does not reflect mixing of the central inflow and pre-swirl inflow in the higher cavity.Pressure distribution of the two- and three-dimensional computation is similar

and the measurements are within the two results;the heat transfer of the main disk is determined by the central inflow

the two- and three-dimensional computation is almost identical

and heat transfer results of Realizable k-ε turbulence model are mainly good with the measurements qualitatively and quantitatively.

关键词

Keywords

references

Views

558

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiment of flow characteristics of direct transfer pre-swirl system

Simulation method of short crack propagation in turbine disks based on crystal plasticity

Numerical simulation of internal flow field in gas generator of fire extinguishing bomb

Numerical simulation of light-craft effects onlaser supported donation wave with gas-liquid two phase propellant

Fatigue life prediction method based on the features of surface defects

Related Author

CAI Xu

LI Ye

Ping ZHANG

Shan LU

Xin JING

Mao YANG

Zhongbing LUO

Rongxin ZHOU

Related Institution

School of Power and Energy，Northwestern Polytechnical University

Nondestructive Testing and Evaluation Laboratory， Dalian University of Technology

College of Civil Engineering， Hefei University of Technology

Key Laboratory of Aerospace Chemical Power Technology， Hubei Institute of Aerospace Chemical Techologh， China Aerospace Science and Technology Corporation，Xiangyang Hubei

Hubei Institute of Aerospace Chemistry Technology， China Aerospace Science and Technology Corporation，Xiangyang Hubei

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰