Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling

YUAN Hua-cheng; TENG Jian; GUO Rong-wei

Chinese

您当前的位置：

首页 >

文章列表页 >

Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling

更新时间：2026-07-07

- Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling
- Vol. 27, Issue 11, (2012)
- 作者机构：
  
  南京航空航天大学能源与动力学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
YUAN Hua-cheng, TENG Jian, GUO Rong-wei. Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling[J]. 2012, 27(11).
DOI：

YUAN Hua-cheng, TENG Jian, GUO Rong-wei. Research on variable geometry technology of 2-D hypersonic inlet with contract ratio under controlling[J]. 2012, 27(11). DOI：

摘要

提出了一种进气道内收缩比可控、包括唇口后退等几何动作的变几何进气道的设计思路

给出了具体的设计过程及影响因素.据此开展了二元高超声速定、变几何进气道气动方案设计

并进行了细致的数值模拟

给出了进气道气动性能参数随来流马赫数的变化规律

将定、变几何进气道气动性能进行了对比分析

结果显示:设计马赫数下

定、变几何进气道气动性能基本相同;非设计马赫数下

变几何进气道的流量系数明显高于定几何方案

且马赫数越低

两者相差越大.静压比、温升比、总压恢复系数及隔离段出口马赫数则相差不大.

Abstract

Based on the two-dimensional(2-D)fixed hypersonic

a new concept of variable geometry hypersonic inlet that the tip moving back off to increase the mass capture ratio was presented.The flow in the hypersonic inlet was analyzed with two-dimensional numerical analyzer

and the inlet performance comparisons were made between the variable geometry hypersonic inlet and fixed inlet at different Mach numbers of inflow.The results indicate that the performance of the variable geometry inlet in the same as that of the fixed one at design Mach number

and the performance of the variable geometry inlet is better than that of the fixed inlet at non design point.All of them indicate that the variable geometry hypersonic inlet is satisfying.

关键词

Keywords

references

Views

531

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Over/under type inlet scheme for turbine-based combined cycle engine

Numerical simulation on bypass transition of variable cycle engines

Dynamic investigation on hypersonic sidewall compression inlets with cowl valve during the process of transition

Simulation method of short crack propagation in turbine disks based on crystal plasticity

Numerical simulation of internal flow field in gas generator of fire extinguishing bomb

Related Author

WANG Ya-gang

LIU Zeng-wen

WANG Zhan-xue

CAI Yuan-hu

WU Jun-qi

ZHANG Kun-yuan

Ping ZHANG

Shan LU

Related Institution

College of Power and Energy, Northwestern Polytechnical University

School of Power and Energy，Northwestern Polytechnical University

Nondestructive Testing and Evaluation Laboratory， Dalian University of Technology

College of Civil Engineering， Hefei University of Technology

Key Laboratory of Aerospace Chemical Power Technology， Hubei Institute of Aerospace Chemical Techologh， China Aerospace Science and Technology Corporation，Xiangyang Hubei

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰