Radial Stiffness Characteristics Simulation Analysis of Annular Rubber
|更新时间:2026-07-10
|
Radial Stiffness Characteristics Simulation Analysis of Annular Rubber
Vol. 14, Issue 3, Pages: 51-55(2009)
作者机构:
哈尔滨理工大学机械动力工程学院
作者简介:
基金信息:
DOI:
CLC:TB535.1
Published:2009
稿件说明:
移动端阅览
QIN Bai, SHAO Jun-peng, ZHANG Yan-qin, et al. Radial Stiffness Characteristics Simulation Analysis of Annular Rubber[J]. 2009, 14(3): 51-55.
DOI:
QIN Bai, SHAO Jun-peng, ZHANG Yan-qin, et al. Radial Stiffness Characteristics Simulation Analysis of Annular Rubber[J]. 2009, 14(3): 51-55.DOI:
Radial Stiffness Characteristics Simulation Analysis of Annular Rubber
摘要
利用ANSYS软件建立了环形橡胶的有限元参数化模型
将对模型仿真所得结果与已有数据进行对比
验证了仿真模型的正确性
实现了环形橡胶径向刚度的快速计算.在此基础上
分析了内外圆柱面半径与轴向长度对环形橡胶简化径向刚度值的影响
研究了环形橡胶的径向刚度特性
确立了在环形橡胶实际设计中需要考虑的要点
为环形橡胶的设计提供了依据.
Abstract
The finite element model of annular rubber based on ANSYS is built up.And the cantrast between the experimental data which are available is made and the analysis results of the finite element model verifies the validity of the model.The fast calculation of the rubber bush radial stiffness is achieved.Based on this model
the radial stiffness characteristics of rubber bush are studied by analyzing the influence of inner and outer radii and axial length on the non-dimensional values of radial stiffness.And sev...
Prediction and Verification of Stability Domain in the Milling Process of Titanium Alloy Thin walled Workpiece
The Study of the Fixation for Femoral Neck Fracture
Buckling Predication of Laminated Composite with Elliptical Hole under Shearing Loads by Simulation
Tissue Modeling Method in Virtual Orthopedic Surgery System:a Review
Finite Element Analysis of Extrusion Forming of ZK60 Magnesium Alloy Bar
Related Author
LIU Zhibo
LI Hengshuai
LI Xiaochen
XIE Na
YUE Caixu
GUO Hong-shu
WANG Mo-nan
WAN Zhi-min
Related Institution
School of Mechanical and Power Engineering, Harbin University of Science and Technology, Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education
Robotics Institute,Harbin University of Science and Technology
Servo-technology Institute of China Aerospace Science and Industry Corporation
Center for Analysis and Measurement,Harbin Institute of Technology