Evaluation of dispersive performance of asphalt mixture during mixing of hot in-place recycling

MA Tao; WANG Zhen; ZHAO Yong-li; HUANG Xiao-ming

Chinese

您当前的位置：

首页 >

文章列表页 >

Evaluation of dispersive performance of asphalt mixture during mixing of hot in-place recycling

更新时间：2026-10-19

- Evaluation of dispersive performance of asphalt mixture during mixing of hot in-place recycling
- Vol. 43, Issue 12, Pages: 128-131(2011)
- 作者机构：
  
  东南大学交通学院, 210096 南京,mataoseu@163.com
- 作者简介：
- 基金信息：
- DOI：
  CLC： U416.26
- Published：2011
- 稿件说明：
移动端阅览
MA Tao, WANG Zhen, ZHAO Yong-li, et al. Evaluation of dispersive performance of asphalt mixture during mixing of hot in-place recycling[J]. 2011, 43(12): 128-131.
DOI：

MA Tao, WANG Zhen, ZHAO Yong-li, et al. Evaluation of dispersive performance of asphalt mixture during mixing of hot in-place recycling[J]. 2011, 43(12): 128-131. DOI：

摘要

为了有效评价沥青路面就地热再生过程中旧路面沥青混合料的拌和分散性

保障就地热再生拌和工艺质量

设计一种简单可行的室内拌和筛分试验

通过室内模拟拌和与筛分试验

研究就地热再生过程中不同加热温度

不同拌和时间

再生剂的加入对就地热再生混合料分散性的影响.试验结果表明:当旧料加热温度由110 ℃提高至120 ℃时

旧料的拌和分散性明显提高;当旧料的拌和时间由1 min延长至2 min时

旧料的拌和分散性也会得到明显改善;加入再生剂后

再生剂能够起到软化旧料的作用

从而改善旧料的拌和分散性.旧料的加热温度

拌和时间以及再生剂的加入是影响旧料拌和分散性和就地热再生拌和工艺质量的3个关键因素.提高旧料的加热温度

延长旧料的拌和时间以及添加软化作用良好的再生剂均能够有效改善旧料的拌和分散性

提高就地热再生工艺质量.

Abstract

To evaluate the dispersive performance of aged asphalt mixture during hot in-place recycling of asphalt pavement and guarantee the hot in-place recycling construction quality

a simple and easy-doing blending and screening test was designed. By in-laboratory blending and screening tests

the influences of different heating temperatures

different blending time and recycling agents on the dispersive performances of aged asphalt mixtures were evaluated. The results indicated that

the heating temperature of 120 ℃ resulted better dispersive performance of aged asphalt mixture than 110 ℃; the blending time of 2 mins resulted better dispersive performance of aged asphalt mixture than 1 min; and the recycling agent could improve the dispersive performance of aged asphalt mixture. Thus

higher heating temperature

longer blending time and good recycling agent can improve the construction quality of hot in-place recycling asphalt pavement.

关键词

Keywords

references

Views

467

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Conjugate heat-transfer characteristics of impinging jet for hot air heating asphalt pavement

Performance evaluation indicator of ultra-thin wearing course asphalt mixture

Factors influencing strength of cement asphalt mortar and strength mechanism

Reduction of asphalt concrete anti-fatigue performance under hydrodynamic effect

Segmentation of coarse aggregate adhesion images using morphological multiscale algorithm

Related Author

ZHANG Hui

GU Hairong

CAI Wanzhi

ZHENG Jiangyi

LIU Daocheng

XU Xinxin

QI Yu-xiang

BIAN Xin

Related Institution

Henan Key Laboratory of High·grade Highway Detection and Maintenance Technology

National Engineering Research Center of Highway Maintenance Equipment,Changan University,Xian

Shijiazhuang Sixth Municipal Construction Co. Ltd.

Jiangsu Province Traffic Planning Design Institute

School of Transportation Science and Engineering, Harbin Institute of Technology

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰