Brittany Muntifering, Sarah Jane Blair, Cajer Gong, et al. Cavity Evolution at Grain Boundaries as a Function of Radiation Damage and Thermal Conditions in Nanocrystalline Nickel[J]. Materials Research Letters, 2016, 4(2): 96-103.
DOI:
Brittany Muntifering, Sarah Jane Blair, Cajer Gong, et al. Cavity Evolution at Grain Boundaries as a Function of Radiation Damage and Thermal Conditions in Nanocrystalline Nickel[J]. Materials Research Letters, 2016, 4(2): 96-103.DOI: 10.1080/21663831.2015.1121165.
Cavity Evolution at Grain Boundaries as a Function of Radiation Damage and Thermal Conditions in Nanocrystalline Nickel
Enhanced radiation tolerance of nanostructured metals is attributed to the high density of interfaces that can absorb radiation-induced defects. Here
cavity evolution mechanisms during cascade damage
helium implantation
and annealing of nanocrystalline nickel are characterized via
in situ
transmission electron microscopy (TEM). Films subjected to self-ion irradiation followed by helium implantation developed evenly distributed cavity structures
whereas films exposed in the reversed order developed cavities preferentially distributed along grain boundaries. Post-irradiation annealing and orientation mapping demonstrated uniform cavity growth in the nanocrystalline structure
and cavities spanning multiple grains. These mechanisms suggest limited ability to reduce swelling
Atomistic mechanism of nucleation and growth of a face-centered orthogonal phase in small-sized single-crystalline Mo
Mechanically controlling the reversible phase transformation from zinc blende to wurtzite in AlN
Si-integrated ultrathin films of phase-pure Y3Fe5O12 (YIG) via novel two-step rapid thermal anneal
Microstructural specificity of optimal creep performance in Ni-based single crystal superalloys under 980°C-250 MPa and 1100°C-137 MPa conditions
Related Author
Li Zhong
Ting Zhu
Hua Hong
Yin Zhang
Sijing Chen
Zifeng Wang
Hai Li
Yan Lu
Related Institution
d State Key Laboratory for Turbulence and Complex System Department of Mechanics and Engineering Science Peking University
a SEU-FEI Nano-Pico Center Key Laboratory of MEMS of Ministry of Education School of Integrated Circuits Southeast University
c Woodruff School of Mechanical Engineering Georgia Institute of Technology Atlanta
b College of Materials Science and Engineering Instrumental Analysis Center Taiyuan University of Science and Technology
a SEU-FEI Nano-Pico Center Key Laboratory of MEMS of Ministry of Education School of Integrated Circuits Southeast University Nanjing People’s Republic of China