Influence of injected interstitials on α′ precipitation in Fe–Cr alloys under self-ion irradiation
Original Report|更新时间:2026-08-19
|
Influence of injected interstitials on α′ precipitation in Fe–Cr alloys under self-ion irradiation
Materials Research LettersVol. 5, Issue 2, Pages: 117-123(2017)
作者机构:
1. Service de Recherches Métallurgiques Appliquées Laboratoire d’Analyse Microstructurale des Matériaux CEA Université Paris-Saclay Gif-sur-Yvette France,DEN
2. Normandie Univ UNIROUEN INSA Rouen CNRS Groupe de Physique des Matériaux
3. Service de Recherches de Métallurgie Physique CEA Université Paris-Saclay,DEN
4. Centre de Sciences Nucléaires et de Sciences de la Matière (CSNSM) Université Paris-Saclay
5. Service de Recherches Métallurgiques Appliquées Laboratoire d’Analyse Microstructurale des Matériaux CEA Université Paris-Saclay,DEN
O. Tissot, C. Pareige, E. Meslin, et al. Influence of injected interstitials on α′ precipitation in Fe–Cr alloys under self-ion irradiation[J]. Materials Research Letters, 2017, 5(2): 117-123.
DOI:
O. Tissot, C. Pareige, E. Meslin, et al. Influence of injected interstitials on α′ precipitation in Fe–Cr alloys under self-ion irradiation[J]. Materials Research Letters, 2017, 5(2): 117-123.DOI: 10.1080/21663831.2016.1230896.
Influence of injected interstitials on α′ precipitation in Fe–Cr alloys under self-ion irradiation
BSTRACTDepending on the particle used to irradiate Fe–Cr alloys
at the same dose and temperature
α′ precipitation may occur or not. This paper aims at explaining the origin of the absence of α′ precipitation under ion irradiation. A Fe–15at.%Cr alloy was irradiated with 2 MeV Fe
2+
ions at 300°C and analysed using atom probe tomography. For the first time to our knowledge
α′ particles were observed under ion irradiation. The characterisation of the α/α′ decomposition with depth showed that injected Fe strongly reduced α′ precipitation. They might have played a major role in the absence of α′ precipitation under ion irradiation.
Suppressed radiation damage by alloying elements mixture: a demonstration in V-Nb-based multi-principal element alloys
Achieving superior high-temperature strength in nanostructured Al-Cu-Mn alloy with Sc addition
Contributions and role of B2 nanoparticles in the exceptional strength/ductility trade-offs of Al0.3CoCrFeMnNi high entropy alloy
Solid-solution like or nanoprecipitation like: the role of chemical short-range order in strengthening CoNiV
Evading strength-corrosion tradeoff in laser-melted Al alloys through twin-related grain boundary engineering
Related Author
Zhixi Zhu
Xiaoyang Zhou
Radu-Florin Andrei
Decebal Iancu
Marin Focsaneanu
Yanan Guo
Xun Guo
Gihan Velişa
Related Institution
b Horia Hulubei National Institute for Physics and Nuclear Engineering
a School of Materials Science and Engineering Beijing Institute of Technology
c Department of Civil and Mechanical Engineering Technical University of Denmark
b Electron Microscopy Center of Chongqing University Chongqing University
a International Joint Laboratory for Light Alloys (MOE) College of Materials Science and Engineering Chongqing University Chongqing People’s Republic of China