Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering
Original Reports|更新时间:2026-08-19
|
Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering
Materials Research LettersVol. 10, Issue 9, Pages: 567-574(2022)
作者机构:
1. a School of Materials Science and Engineering Tianjin Key Laboratory of Composite and Functional Materials Tianjin University
2. b Joint School of National University of Singapore and Tianjin University International Campus of Tianjin University
3. b Joint School of National University of Singapore and Tianjin University International Campus of Tianjin University Fuzhou People’s Republic of China
4. a School of Materials Science and Engineering Tianjin Key Laboratory of Composite and Functional Materials Tianjin University Tianjin People’s Republic of China
5. c Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) Tianjin People’s Republic of China
6. d Key Laboratory of Advanced Ceramics and Machining Technology Ministry of Education Tianjin University
Lizhuang Yang, Tielong Han, Xiang Zhang, et al. Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering[J]. Materials Research Letters, 2022, 10(9): 567-574.
DOI:
Lizhuang Yang, Tielong Han, Xiang Zhang, et al. Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering[J]. Materials Research Letters, 2022, 10(9): 567-574.DOI: 10.1080/21663831.2022.2066484.
Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering
l matrix composites with the strain-delocalization effect were fabricated by spark plasma sintering using graphene nanosheets decorated with Cu nanoparticles (Cu NPs@GNS) as reinforcement. The Joule heat
thermal stress-induced dynamic crystallization and the abnormal grain growth facilitate shorter diffusion paths of Cu atoms in the Al matrix thus generating a supersaturated solid solution near the GNS/Al interface. Thereby
the intragranular plate-like θ′-Al
2
Cu was generated in the adjacent grains of GNS so that the strain-delocalization effect was realized. The combination of excellent strain hardening ability
transgranular fracture mode and elongated crack path results in strength-ductility synergy.