WU Yue, ZHAO Chunfeng, WANG Youbao, et al. Compaction grouting model in clay considering unloading effect[J]. 2020, 52(11): 71-79.
DOI:
WU Yue, ZHAO Chunfeng, WANG Youbao, et al. Compaction grouting model in clay considering unloading effect[J]. 2020, 52(11): 71-79.DOI: 10.11918/201902121.
Compaction grouting model in clay considering unloading effect
To study the compacting effect of post-grouting in clay under unloading effect
a compaction grouting model was constructed based on the spherical cavity expansion theory and the effect of different unloading degrees through the reduction of soil elastic modulus. The ultimate grouting pressure
expansion rate of grouting
expansion rate of plastic zone
and distributions of radial and circumferential stresses and radial displacement along radial directions were calculated under different unloading degrees. Results show that the ultimate grouting pressure of compaction grouting and the increase rate of plastic zone radius with the diffusion radius of the grout decreased nonlinearly with the increase of the unloading degree. Under the same grouting pressure
when the value of unloading ratio was less than 0.8
the unloading degree had no obvious effect on the distributions of radial and circumferential stresses and radial displacement along radial directions
whereas when the value of unloading ratio was larger than 0.8
the radial and circumferential stresses and radial displacement of the soil at the same position were obviously larger than those when the unloading ratio was less than 0.8. For the same grouting volume
the radial stress at the same position
the minimum circumferential stress
and the radial distance of the steady values of circumferential and radial stresses decreased with increasing unloading degree. However
the distribution of radial displacement was not affected by the unloading degree. With the same unloading ratio
the radial stress at the same position
the minimum circumferential stress
the steady values of circumferential and radial stresses
and the radial distance of the steady values of radial displacement increased with the increase of grouting volume. The magnitude of the minimum circumferential stress was not affected by the unloading degree and grouting volume.