Probability analysis method and application of wedge stability

QIN Shengwu; MA Zhongjun; CHEN Junjun; L; Jiangfeng; CHEN Jianping

doi:10.11918/j.issn.0367-6234.201705028

Chinese

您当前的位置：

首页 >

文章列表页 >

Probability analysis method and application of wedge stability

更新时间：2026-10-19

- Probability analysis method and application of wedge stability
- Vol. 49, Issue 12, Pages: 2017-12(2017)
- 作者机构：
  
  吉林大学建设工程学院,长春,130026
- 作者简介：
- 基金信息：
- DOI：10.11918/j.issn.0367-6234.201705028
  CLC： TU457
- Published：2017
- 稿件说明：
移动端阅览
QIN Shengwu, MA Zhongjun, CHEN Junjun, et al. Probability analysis method and application of wedge stability[J]. 2017, 49(12): 2017-12.
DOI：

QIN Shengwu, MA Zhongjun, CHEN Junjun, et al. Probability analysis method and application of wedge stability[J]. 2017, 49(12): 2017-12. DOI： 10.11918/j.issn.0367-6234.201705028.

摘要

为综合分析参数具有多种不确定性的楔体的稳定性，提出一种基于Fisher最优分割法和盲数理论的楔体稳定性概率分析方法，该方法通过构造基于Fisher最优分割法的楔体稳定性盲数评价模型，综合考虑楔体参数的多种不确定性，确定楔体稳定性概率分布.文章构建了单滑面与双滑面的不确定性楔体稳定性盲数评价模型，将该模型应用于经典的双滑面楔体稳定性分析之中，并与传统的均值安全系数、数值模拟、蒙特卡洛抽样(MCS)方法的结果进行对比，结果表明：均值安全系数法和swedge数值分析只能给出一个固定的安全系数，准确度较低，不能考虑楔体的失稳概率，基于Fisher最优分割法和盲数理论的楔体稳定性分析方法安全系数累计频率与公认比较准确的蒙特卡洛抽样方法几乎重合，并且更加的高效简便，验证了该方法的可靠性与有效性.最后，将该方法应用于兴城某楔体的稳定性评价，为楔体的防治提供数据支撑.

Abstract

To comprehensively analyze the wedge stability whose parameters have various uncertainties

a method was proposed to analyze the stability of wedge probability based on blind data theory and Fisher optimal segmentation method. A blind data evaluation model of wedge stability considering a variety of wedge parameter uncertainties was created to determine the wedge stability. The evaluation model of the blind number of the stability of the wedge was given

and the model was applied to the classical double-wedge stabilization

in which the result was compared with that from the traditional mean safety coefficient

numerical simulation

and Monte Carlo sampling (MCS). The compared results show that the result of evaluation model of wedge stability based on blind data theory and Fisher optimal segmentation method is coincident with the generally accepted MCS method

which verifies the reliability and efficiency of the proposed method. The proposed method was applied to the stability evaluation of the wedge in Xingcheng to provide data support for the prevention and control of the wedge.

关键词

Keywords

references

Views

597

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A damage assessment method of solar wings under submillimeter MM/SD impact

Analysis on seismic performance of frame structure using non-probabilistic convex model

A seasonal management method for controlling pollution sources discharge based on Bayesian method

Experment and analysis of pore structure of building hardened gypsum based on fuzzy sub-cluster

Separable Monte Carlo simulation applied to structures reliability

Related Author

PANG Baojun

CAO Wuxiong

HU Diqi

LIU Yuyan

CHI Runqiang

SUN Wen

XIE Lili

ZHANG Jinguo

Related Institution

State Key Laboratory of Micro-Spacecraft Rapid Design and Intelligent Cluster Harbin Institute of Technology

Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences

School of Astronautics, Harbin Institute of Technology

Department of Civil Engineering, Harbin Institute of Technology at Weihai

State Key Laboratory of Urban Water Resource and Environment (Harbin Institute of Technology)

AI问答

Postal code：100079
Tel：（010）53879206 Email：tmw@bjxintong.com.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09082226号-64 京公网安备11010602201714号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰